Lampwork Etc.
 
TrueDesign

LE Live Chat

Enter Live Chat

No users in chat


Donate via PayPal to donate@lampworketc.com

Beads of Courage


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2015-08-27, 7:09pm
rainz3d rainz3d is offline
Junior Member
 
Join Date: Aug 27, 2015
Posts: 2
Question Reducing kiln-formed glass

Hi all,

I've been fusing a lot of lamp-working glass in the microwave kiln and have made some good pieces, but I obviously haven't been able to reduce any of them to obtain mirror-like surfaces because I don't have a torch.

Would it work if I bought a Hothead torch and passed it over the cabachons for a few seconds while the glass is red-hot and then put the kiln lid back on to anneal the pieces in the kiln as per usual?

Just to be clear, I'm trying to reduce glass that I fuse on the kiln shelf rather than on a mandrel.

Any help is much appreciated.
Reply With Quote
  #2  
Old 2015-08-27, 7:15pm
shawnette's Avatar
shawnette shawnette is offline
I fart diamonds
 
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
Default

Using activated charcoal in your kiln will produce a reducing environment, but I don't know if it works with microwave kilns. It's cheap (found in the pet aisle for fish tanks), so you might want to try it.
__________________
-Shawnette
the original "everybody get a grip" girl

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 2015-08-27, 8:50pm
rainz3d rainz3d is offline
Junior Member
 
Join Date: Aug 27, 2015
Posts: 2
Thumbs up activated charcoal

Hmm that sounds interesting. I'll give that a shot. Thanks for the tip
Reply With Quote
  #4  
Old 2015-08-27, 11:28pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

You could ignite a piece of charcoal and stick it in the kiln as a half glowing ember.
That would burn up the oxygen in the microwave and give you a reducing atmosphere.

You would want some sort of metal dish of some sort small enough to fit under the dome with you piece or else use a few larger chunks in a metal dish and let them burn as an ember for a few minutes with the door closed to use up the oxygen inside the microwave.


You could light a candle flame and close the door to get some idea of how long it will take to use up the oxygen by timing when the flame goes out.

Metal can be used in a microwave as long as there are no points or sharp edges. I have had a metal tray that rotates in my thousand watt unit for the last 25 years.

A ceramic dish will do as well but the heat from the charcoal could cause it to break.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote
  #5  
Old 2015-08-28, 11:37am
hyperT's Avatar
hyperT hyperT is offline
hyperT
 
Join Date: Jan 31, 2013
Location: San Antonio, Texas
Posts: 582
Default Oxidation Reduction

Electric kilns produce an oxidizing atmosphere.
Gas kilns produce a reduction atmosphere.
I have used charcoal in my electric kiln and it works fine.
Mostly I was stopping the devitrifying on the surface of the glass
while making bent glass lamp shades.
This problem is more caused by the electric kiln running the
temperature up to fast. I never did ramp things up or down.
Just thought I would post this incase any kiln fire people are
having that problem.

Have fun, Wayne
Reply With Quote
Reply

Tags
anneal, fuse, hothead, kiln, lampworking


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 12:43am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 34.237.245.80