Quad Manifold on a barracuda torch

[cinsu]

I bought a barracuda torch and after I got it decided that I wanted the quad manifold. I ordered the quad manifold from Bethlehem separately but when got it wasn't sure how to attach it. The screw holes don't really look like they have screws in them and am unsure what wrench to use to change the manifold.

[Trey Cornette]

You will need an Allen Wrench of the appropriate size.
If you are unsure of how to do it see if you can get Bethlehem to do it for you.
You want to make sure it is nice and tight. I have seen where people have done this conversion themselves and not gotten the screws tight enough causing a leak around the manifold gasket.
You can check for links with some soapy water. Leaks will cause bubbles.
Good luck