|
Boro Room -- For Boro-related tips, techniques, and questions. |
2023-06-26, 10:37pm
|
Junior Member
|
|
Join Date: Jun 26, 2023
Posts: 3
|
|
I want to make a bead out of boro glass. need your help!
Could you tell me about the wires and mandrels that can be used for boroglass?
I've had some tips from persistent searches.
I ordered titanium wire based on this tip...
But this wire became ash as soon as it entered the torch!
The wire I used is 'Titanium Wire 28 Gauge 30 FT'.
What did I do wrong? Was the wire too thin?
What wire should I use to withstand this blazing flame?
I'm going to try 1/16 stainless steel for the mandrel.
...Am I going to turn this into ash again ?
|
2023-06-27, 5:18am
|
Senior Member
|
|
Join Date: Aug 31, 2022
Location: Cincinnati, OH
Posts: 157
|
|
28gauge is very thin, and it is not safe to use titanium in a torch flame, titanium ignites and then is very difficult to extinguish.
I use standard stainless steel bead mandrels for boro beads, same as soft glass. there is no difference.
|
2023-06-27, 6:31am
|
|
Senior Member
|
|
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,263
|
|
I burn through 1/16 for boro. 3/32 or larger is better I think. Stainless steel welding rod is what I use, cut down to size. And you need some bead release.
__________________
Kathy
|
2023-06-27, 7:10am
|
Senior Member
|
|
Join Date: Aug 31, 2022
Location: Cincinnati, OH
Posts: 157
|
|
Quote:
Originally Posted by echeveria
I burn through 1/16 for boro. 3/32 or larger is better I think.
|
yes, good point, I also avoid the thinner diameters when making boro beads (though I rarely make beads, basically just for color samples when I get new colors)
|
2023-06-27, 2:51pm
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,693
|
|
Use TIG stainless steel welding rod, don't get the stuff with the flux in it. I get L316 or L308. You can buy ready made mandrels online if you don't have a welding shop nearby.
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2023-06-27, 8:47pm
|
Junior Member
|
|
Join Date: Jun 26, 2023
Posts: 3
|
|
Quote:
Originally Posted by kevingreenbmx
yes, good point, I also avoid the thinner diameters when making boro beads (though I rarely make beads, basically just for color samples when I get new colors)
|
I'll buy a larger than 3/32. I didn't know I needed a bead release. I was just burning mandrel
|
2023-06-27, 9:21pm
|
Junior Member
|
|
Join Date: Jun 26, 2023
Posts: 3
|
|
Quote:
Originally Posted by Eileen
Use TIG stainless steel welding rod, don't get the stuff with the flux in it. I get L316 or L308. You can buy ready made mandrels online if you don't have a welding shop nearby.
|
I think I can get both 308 and 316 on the Internet!
|
2023-06-30, 1:17pm
|
|
Fried Cat
|
|
Join Date: Jan 02, 2011
Posts: 680
|
|
Don’t put the mandrel directly in the heat. Only the glass is supposed to touch the mandrel or wire. Tools (generally speaking) should never remain in the flame. They will all melt, even the 3/32nd and larger.
If metal things turn red, move it.
|
2023-08-08, 9:41am
|
|
Dazed and Confused
|
|
Join Date: Jan 10, 2007
Location: Los Angeles, via London
Posts: 289
|
|
I'll ditto on the TIG stainless steel rods, though you'll have to cut them to size as the rods themselves are about 3ft long. Buy a packet and you'll never have to worry about mandrels again!
The only mandrels I buy now from bead shops are super thick and/or hollow ones.
Also ditto on the diameter - Boro torches will cook smaller diameter rods very quickly.
I can't think in inch fractions ♀️ but anything smaller than 2mm will probably not make it to the annealer!
__________________
Cats prefer plain crisps
|
2023-08-09, 7:11pm
|
|
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,464
|
|
I buy mandrels from Lost_helm on ebay, very reliable.
https://www.ebay.com/usr/lost_helm
Wire....for boro not sure. I think most are a no go.
If the 104 marbles are properly annealed, they should be as sturdy as boro
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 9:39am.
|