Lampwork Etc.
 
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat




Beads of Courage


 
  #1  
Old 2022-03-09, 11:27pm
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default Glass loops, lace work or loop stitching

There are many names for this technique; spun glass, lace work, loop stitching, crocheting, glass loops or knitting (knitting or loop stitching usually refer to a wool knitted look)

I have tried to do loop stitches but am very slow & my quality sucks.
So developed my own style – glass loops.

2 x 4mm clear rods (I’m using boro, you could use soft glass)
Any colour stringer
Marble mould, 32mm diameter for this demo.
Graphite push (8mm dia smaller than marble mould)

Make a small maria 7-10 mm
Using a very small flame, keep the maria hot (not melty) - very close to the flame, but not in the flame. Melt tip of second rod, keeping it in the flame. Move the melted tip to touch the side of maria, pull back into the flame, rotate maria a little & repeat. Note, don’t move the maria from next to flame, just rotate it.

After 2-3 rotations around the maria, check the curve against the graphite push.
If curve is too small, heat the loops to a soft red colour (don’t melt!!!) & push onto graphite to enlarge curve.

If curve is too large, heat the loops, press the loops against side of marble mould, using the graphite push to form a nice curve.


Add more loops (repeat above) until you have half a sphere.

Evenly heat half sphere (don’t melt).
Melt tip of stringer, touch it to inside of sphere to make small dots – you may need to flame cut thin strings.
When you have enough dots, melt back the stringy bits.


If using soft glass, keep returning what is made to cold part of flame, so it does not crack.
Add more clear loops (so their curve is a little bigger than the curve of the ball).
Add more colour dots.

Heat open end of ball & use marble mould to push it into sphere shape.

Repeat above, until ball is closed


Evenly heat the whole ball to a dull red (don’t melt).
Grab ball with claw grabbers & make a bail.

If soft glass, place in a hot kiln & anneal.
With boro, I put under a thermal blanket to cool & batch anneal latter.

I make 4 sizes, 20, 25, 32 & 50 mm.
Small ones are good for earrings, larger for necklaces & Christmas tree decorations, they really sparkle when light hits them.
Then I though other uses & shapes.

Peter

Last edited by phentron; 2022-04-26 at 6:48pm. Reason: A better title
Reply With Quote
  #2  
Old 2022-03-10, 7:58am
Lepoppet Lepoppet is offline
Senior Member
 
Join Date: Apr 29, 2013
Posts: 307
Default

These are very cool! I could see a large glass bowl filled with them on my coffee table. Maybe with some fiber optic cords running around them. It would be a very elegant centerpiece.
__________________
Maria

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

YouTube: Lampwork Glass Beads by LePoppet
Reply With Quote
  #3  
Old 2022-03-10, 11:06am
ESC ESC is offline
Senior Member
 
Join Date: Feb 02, 2010
Posts: 3,370
Default

What a cool process!
__________________
ESC
Soft glass on a Minor/concentrator since 1996
Reply With Quote
  #4  
Old 2022-03-10, 2:33pm
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default

Maria, had not thought of a bowl centre piece, I will make some without the bail or stem.
Reply With Quote
  #5  
Old 2022-03-11, 6:33am
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

A dozen tiny battery powered fairy lights at the bottom of the bowl would add a flavor of what ever holiday is next.

I think they sell LED strings like that at the dollar stores.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote
  #6  
Old 2022-03-13, 12:15am
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default

I've just made about 50, here they are in a bowl, but need to get better lights.

Peter
Reply With Quote
  #7  
Old 2022-03-13, 2:43pm
ESC ESC is offline
Senior Member
 
Join Date: Feb 02, 2010
Posts: 3,370
Default

Peter, those are just about the coolest thing I've seen in a while!
__________________
ESC
Soft glass on a Minor/concentrator since 1996
Reply With Quote
  #8  
Old 2022-03-31, 12:09am
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default

Made a hot air balloon, using same technique as above, finished about 5 inches high. My first attempt was OK, but think I can do better, I now have orders for 8. Have just ordered some graphite to make 3 inch marble mold (& maybe a 4-5 inch one) to make bigger balloons.

Peter
Reply With Quote
  #9  
Old 2022-04-01, 3:08pm
Larysa's Avatar
Larysa Larysa is offline
Senior Member
 
Join Date: Mar 28, 2016
Posts: 315
Default

How clever ! They look like lace.
Reply With Quote
  #10  
Old 2022-04-03, 8:18pm
Cuttlefish Cuttlefish is offline
Junior Member
 
Join Date: Jan 29, 2008
Posts: 20
Default

Very interesting! Thank you for sharing your technique!
Reply With Quote
  #11  
Old 2022-04-04, 7:34pm
ddnm ddnm is offline
Member
 
Join Date: Oct 04, 2008
Location: Estero, Florida
Posts: 98
Default

Wow, that is cool.
Debby
Reply With Quote
  #12  
Old 2022-04-05, 12:40pm
Lepoppet Lepoppet is offline
Senior Member
 
Join Date: Apr 29, 2013
Posts: 307
Default

What a beautiful bowl of baubles! Love it!
__________________
Maria

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

YouTube: Lampwork Glass Beads by LePoppet
Reply With Quote
  #13  
Old 2022-04-26, 6:56pm
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default

I got the idea for an umbrella (or parasol) from John Peters of Nighthawk Creations, I haven’t seen any other umbrellas like his – so I want to acknowledge him.



This is a good opportunity to give my views on copyright (I know it’s been covered many times). All lampworkers copy when we are learning – if it is a unique design or article by one artist, we need to acknowledge that person & we should not sell it commercially.

I would be flattered if others copied any of my original work (like my lace ball balls with coloured dots on the inside) but if you publish my methods or pictures of your work (copied from mine) then please acknowledge me. Also I have no problem with a few amateur sells of copies of my work, but commercial sales is another thing!!

Another subject, I deliberately put this thread in Free Tutorials not Boro Tuts, because I believe soft glass workers can get useful ideas from boro techniques, just as I (a boro worker) regularly visit soft glass tuts for ideas (I even watch mandril techniques – even through I don’t own any mandrils).

Peter
Reply With Quote
  #14  
Old 2022-05-17, 11:48am
Robin Baum Robin Baum is offline
Junior Member
 
Join Date: Mar 30, 2020
Posts: 7
Default

This is a technique I am trying to master.
I have been fascinated by this art form since watching the glass workers at the fair as a child!
Your tips really help. Never thought to use a graphite push for the roundness!
Thanks!!
Robin

Last edited by Robin Baum; 2022-05-17 at 11:49am. Reason: Additional comments
Reply With Quote
  #15  
Old 2022-05-19, 11:57pm
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default

Hi Robin
I like using any aids or tools which makes my lampworking easier. I'm starting to have hand-eye coordination & steadiness in my hands - I'm 70 this year.

I would like to see your attempts.
Is there anyone doing proper loop stitching? or similar to my method?

Peter
Reply With Quote
  #16  
Old 2022-06-18, 12:55am
phentron phentron is offline
Member
 
Join Date: Jan 12, 2022
Location: country Victoria, Australia
Posts: 33
Default




I love this technique

Peter
Reply With Quote
  #17  
Old 2022-08-29, 11:42pm
Olechka Olechka is offline
Junior Member
 
Join Date: Aug 28, 2022
Posts: 6
Default

Спасибо, очень воздушная техника! Подарок к Рождеству!
Reply With Quote
  #18  
Old 2022-08-29, 11:51pm
KJohn's Avatar
KJohn KJohn is offline
Slogan Challenged...
 
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,273
Default

these are making me happy!
__________________
Kristin ~

Facebook:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Etsy:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #19  
Old 2023-03-10, 11:21am
djglass djglass is offline
Junior Member
 
Join Date: Feb 13, 2022
Posts: 6
Default

very cool technique - thanks for sharing
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 5:01am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 18.232.169.110