|
Tips, Techniques, and Questions -- Technical questions or tips |
2022-04-07, 5:45pm
|
|
Valparaíso - Chile
|
|
Join Date: Oct 27, 2006
Location: Chile
Posts: 590
|
|
Should I put a regulator on propane?
Hello everyone, I bought an oxygen concentrator. Please tell me if I should put a regulator on propane tank?
I appreciate an answer.
Thanks
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
@cristallo_perle
|
2022-04-07, 6:25pm
|
|
Senior Member
|
|
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 2,280
|
|
Yes
__________________
Kathy
|
2022-04-07, 8:00pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Absolutely.
Propane turns from liquid to a gas at room temperature at a pressure of 3000 psi so you will need something to reduce that down to a workable pressure.
Propane Bar B Que set ups drop it down to about 35 psi so the Bar B Que section will have a regulator that will work but it won't have a dial to show you anything.
Also, as an aside, the red and green welders hose is designed for acetylene and oxygen not propane and oxygen.
Propane does this chemistry thing to the inside of the acetylene hose and causes it to break down and get gummy which then will clog up the tiny holes, valves and tubes in a dual gas torch after a years use or so.
Then you have to send it back to the manufacturer to get it repair if they can fix it.
The hose can also begin to leak fuel gas as well so that makes it not only annoying but dangerous as well to use welding hose with propane.
What you need for propane is the black hose with a marked "T" rating on it also at the Bar B Que isle.
Stay safe and read as much of the studio and safety threads of conversation here as you can.
It can be a lot to slog through but you only have to learn it once.
__________________
The Zombie Apocalypse is Upon Us.
|
2022-04-16, 3:29pm
|
|
Valparaíso - Chile
|
|
Join Date: Oct 27, 2006
Location: Chile
Posts: 590
|
|
Thanks!!!
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
@cristallo_perle
|
2022-04-17, 1:21pm
|
Senior Member
|
|
Join Date: Dec 31, 2009
Posts: 504
|
|
Get yourself a regulator for that tank ASAP. Propane is dangerous stuff, and you need absolute control over the flow. Also, get a flashback arrestor. This keeps the flame from traveling back down your hose to the tank. That doesn't happen often, but it is to be avoided nonetheless. If you're using an oxy tank, get one for that thing, too; flashback arrestors are often sold in sets of one each and aren't all that expensive.
|
2022-04-19, 6:05am
|
|
Valparaíso - Chile
|
|
Join Date: Oct 27, 2006
Location: Chile
Posts: 590
|
|
Thanks. Regarding the oxygen tank, I have an oxygen concentrator.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
@cristallo_perle
|
2022-04-19, 9:10am
|
Senior Member
|
|
Join Date: Dec 31, 2009
Posts: 504
|
|
I do too, and those do not need an arrestor. However, if you find yourself in the future using a tank for whatever reason (aliens abduct your oxycon or something) the arrestor is good to have on hand.
|
2022-04-19, 6:15pm
|
|
Valparaíso - Chile
|
|
Join Date: Oct 27, 2006
Location: Chile
Posts: 590
|
|
Thanks you for your answer!!!
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
@cristallo_perle
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:55pm.
|