|
Tips, Techniques, and Questions -- Technical questions or tips |
2013-03-11, 9:09am
|
No Longer an LE Member
|
|
Join Date: Sep 09, 2012
Posts: 173
|
|
bye
|
2013-03-11, 11:13am
|
Mary Lockwood
|
|
Join Date: Jun 21, 2005
Location: Boonies
Posts: 5,831
|
|
Your fins slumped because they were so close to the elements. The elements in any kiln fire to raise the temperature in the kiln to stay within a certain parameter of degrees controlled by your thermostat. The elements themselves, when fired up, are hotter than the temperature you have with your thermostat. If you put thin little pieces of glass too close to the elements they will easily slump.
I have an old radiant coil waffle iron that I was trying to use to preheat big rods and boy did that thing ever get hot. Too hot. It would slump the rods even though the elements were much thinner than kiln elements.
Made excellent waffles though.
Under normal conditions, your Glass Hive kiln won't do that to your soft glass turtle flippers if it is programmed for soft glass temperatures.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 5:45am
|
|
Junior Member
|
|
Join Date: Jan 24, 2013
Location: San Francisco Bay Area
Posts: 26
|
|
mini annealer
I have been using the mini annealer for 3 months now without one problem. They pass the throwing test, etc. I really like it!
|
2013-03-14, 6:33am
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
Honestly, if the crappy quality of the imports isn't doing enough harm to the industry, do you really want to match that crap quality by not annealing correctly?
Some of y'all are making me sad. "Throwing test" It's glass for god's sake.
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:15am
|
Senior Member
|
|
Join Date: Dec 21, 2012
Location: Castle Rock, Colorado
Posts: 222
|
|
Come on Tom..the thread was started cause I needed help not criticism. Lets play nice I'm the sand box please
Becky
__________________
Becky Noe
Becky Noe Photography & Design
Newbie - But like a sponge To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:25am
|
|
Unmedicated since '62
|
|
Join Date: Jan 18, 2009
Location: Hunter Valley, Australia
Posts: 5,907
|
|
Quote:
Originally Posted by menty666
Honestly, if the crappy quality of the imports isn't doing enough harm to the industry, do you really want to match that crap quality by not annealing correctly?
Some of y'all are making me sad. "Throwing test" It's glass for god's sake.
|
Quote:
Originally Posted by BeckyNoe
Come on Tom..the thread was started cause I needed help not criticism. Lets play nice I'm the sand box please
Becky
|
But there IS NO SUCH THING as the throwing test, that's the point, devardi have made that one up, even annealed beads will break if you throw them on the floor
In order to be annealed glass needs to be held at a very specific temperature and cooled at a very specific rate - that little open box cannot possibly do that.
Tom, I feel your frustration ...sigh
__________________
Deb
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - my 17yo sons first novel
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. - download, get organised, enjoy
|
2013-03-14, 7:48am
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
Exactly. Not to mention when you drop glass, you impart stress into it. So even if you *had* annealed them, you'd be wise to anneal them a second time after you threw your handcrafted artwork at a table.
I'm not knocking you, Becky; you're new and learning. But I am a bit irked with some of the other folks in this thread who've said that could work as an annealer and have been at this long enough to know better.
Maybe they're just secretly hoping you destroy your own market by selling low quality garbage so they can pick up the sales.
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 8:07am
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
That annealer is just a re-purposed curling iron heater from the beauty industry... Like many things re-purposed it does a so-so job within certain parameters.... It is not a true kiln for annealing.... Why do you think a real kiln state about $600-$700 and goes up from there... A $150 re-purposed curling iron heater is not going to do what you expect, it will not be accurate no matter what dealer tells you and temperatures will not be stable...... IN your zeal as a beginner and attempt to do the right thing and in the end you got taken.... Unfortunately its the fault of the sell and not yours.....
There is no drop test... IF you try try to use one it is a precursor to the "Humpty Dumpty" effect....
All annealing kilns run either hotter or colder than displayed on pyrometer, and you need to do slump test with glass rods to gauge how much controller is off from displayed heat of pyrometer....
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2013-03-14, 10:00am
|
|
PyronamixK
|
|
Join Date: Jun 24, 2005
Location: Spatula City
Posts: 4,196
|
|
Annealing does not remove cracks, btw. So, re-annealing after the throwing test isn't going to help. If there are cracks in there before, there will be cracks in there afterwards.
What annealing does is allow the mass to all cool uniformly so that there is not any stress formed by one part cooling (and contracting) than another part. Something that has wild spikes in temperature, and where the general atmosphere is not pretty constant, is not going to work well as an annealer. In a real annealer, the element is going to turn on and off to keep the temperature constant, sure, but, the overall temperature (not up next to the element) is going to be pretty steady (maybe fluctuate by a couple degrees).
It's a shame that a company that sells knock-offs and extra-cheap items can put out such misinformation (the throw test, for example). I guess their client base generally doesn't know better and the ones who do don't care, they're just there to buy cheap stuff.
__________________
Kimberly
working glass since 1990 - melting it on a torch since 2002
|
2013-03-14, 10:08am
|
|
funny mofo
|
|
Join Date: Nov 25, 2007
Posts: 1,088
|
|
Perfectly annealed glass will break if you drop it on the floor. If you drop it and it DOESN'T break, you were just lucky. If you drop it on the floor and it DOES break, then you have to clean up broken glass. It's still glass; stress it beyond its capacity and it breaks. This goes for both soft glass and boro.
Back when I first started working with glass, I was showing a friend some boro things I'd done. "Look!" I said, "you can drop it on the floor and it won't break!" So I dropped it on the floor and it broke. Cured me of that particular idea pretty quickly. Learn from my mistakes!
__________________
Donna's law of glass: If you're the first one to smell something burning, you're probably the one on fire.
Washington, DC: Taxation Without Representation, 200+ Years and Counting.
|
2013-03-14, 10:13am
|
|
Storm Queen
|
|
Join Date: Aug 30, 2005
Location: SQUIDVILLE
Posts: 8,816
|
|
Quote:
Originally Posted by BeckyNoe
Come on Tom..the thread was started cause I needed help not criticism. Lets play nice I'm the sand box please
Becky
|
It's important that the correct information is out there for everyone reading this. It's not criticism.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 4:10pm
|
Senior Member
|
|
Join Date: Dec 21, 2012
Location: Castle Rock, Colorado
Posts: 222
|
|
All i asked for was help getting my little fins unstuck off the bottom Regardless of anything else..THAT was the matter at hand.
I received great info on how to do that..it worked..I'm tickled pink that my first turtle that will never go anywhere but my house is in one piece and not cracked or doesn't have broken fins.
I am not, for the record, a complete idiot LOL I know the DG annealer is not a real annealer..and i also know that at the time it was given to me as a GIFT for Christmas from a person that doesn't do crafts, let alone glass, that I would be able use it for a rod warmer, or garage at some point when i got the money for the big kiln.
Everything has a purpose, even if it isn't what it was originally intended for or touted to be for.
How many of you have jerry-rigged tools for your glass that were never intended for glass?
Same thing...here..so how bout we just let this thread go away because it's no longer important as Ralph, as one of the nice people on this forum named him, had his fins safely removed from bottom and is happily sitting here on my desk reminding me that there are all kind of lessons to be learned in life, and it's only glass..you don't like it..don't buy it..you don't like a product..don't buy it.
We have the same mentality with our dogs when on the rare occasion we have a litter..you don't like my contract..go to someone else.
Becky
__________________
Becky Noe
Becky Noe Photography & Design
Newbie - But like a sponge To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 6:45pm
|
|
Junior Member
|
|
Join Date: Jan 24, 2013
Location: San Francisco Bay Area
Posts: 26
|
|
sorry Tom, but unfortunately, I am unable to afford a kiln. So, I have to make due with what I can. I am also not selling my beads. But, such harsh words from someone who obviously is farther along than some of us.
|
2013-03-14, 7:03pm
|
Senior Member
|
|
Join Date: Dec 21, 2012
Location: Castle Rock, Colorado
Posts: 222
|
|
Juju..i deal what that mentality in the dog show world ALL the time...leave it alone and they eventually go away
Becky
__________________
Becky Noe
Becky Noe Photography & Design
Newbie - But like a sponge To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:11pm
|
|
funny mofo
|
|
Join Date: Nov 25, 2007
Posts: 1,088
|
|
Quote:
Originally Posted by AKDesigns
It's important that the correct information is out there for everyone reading this. It's not criticism.
|
I think Amy said it best.
__________________
Donna's law of glass: If you're the first one to smell something burning, you're probably the one on fire.
Washington, DC: Taxation Without Representation, 200+ Years and Counting.
|
2013-03-14, 7:29pm
|
|
MacGalver
|
|
Join Date: Oct 15, 2006
Posts: 9,927
|
|
This thread will still be here in five years, being read by folks who may be considering buying this item ~ that's why it's important to get the correct info out there.
When I was first starting to do flamework, I waited a year before I could afford a kiln. I remember how frustrating it was! I don't think anybody is being nasty or negative, they are simply trying to protect newer lampworkers from being misled by a vendor who apparently doesn't understand how annealing really works.
Calling this tool a mini annealer is very misleading. Please don't be fooled.
Jo
__________________
Jo
Frit Diva website To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:32pm
|
|
Life is change. Love it
|
|
Join Date: Oct 10, 2005
Location: Ontario Canada
Posts: 5,566
|
|
I'm sorry if you guys feel put upon. It's been a long journey for many of us, and sometimes we get irritated with misinformation that continues to re-surface on a regular basis. You don't need a kiln to make beads, but any un annealed or poorly annealed bead will crack eventually, so even if you are keeping them for your own use you should be aware of this.
I think it was Pam (very experienced beadmaker) who kept a bunch of unannealed beads in a jar. She would check them periodically and after 10 years or so, almost all of them had cracked.
For those who don't have kilns, there may be someone near you who would be willing to batch anneal for you
__________________
cRlyn, cause Traci says so
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:33pm
|
|
Mama said
|
|
Join Date: Aug 28, 2005
Location: Iowa
Posts: 4,134
|
|
The throwing test? I can't even.
|
2013-03-14, 7:39pm
|
|
Back to 👊 1
|
|
Join Date: Jan 26, 2008
Location: HELL
Posts: 1,050
|
|
Quote:
Originally Posted by Michelle Walsh
The throwing test? I can't even.
|
Aww, come on! Yes you can!
__________________
The greatest pleasure in life is doing what people say you cannot do. - Walter Bagehot
I wanna be a "wild ass bitch in the flames" Thanks Karen H, for that sentence!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Don't make me cranky, I WILL "chuck a tanty!" a la PerfectDeb To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 7:44pm
|
Senior Member
|
|
Join Date: Dec 21, 2012
Location: Castle Rock, Colorado
Posts: 222
|
|
it's all in the attitude..i said VERY early on...this is not about a product or a bashing session..it's a QUESTION that needed an answer.
Education is all great and dandy..but when it's obnoxious hopefully it will not turn them away...I mean seriously..who says this crap?
"Maybe they're just secretly hoping you destroy your own market by selling low quality garbage so they can pick up the sales"
<------shaking her head
that's going to make new people like me just want to jump out and ask all kinds of questions so that I can be criticized because i just wanted to know how to get the damn fins unstuck..
I didn't ask for anyone's opinion on the DG annealer, nor what it does or does not do..other then how to get the friggin fins unstuck.
I'm very disappointed in some of the comments here. I have mentored people in the Australian Shepherd breed, and in Dog shows for almost 10 years now and i have NEVER and would NEVER make any of the comments that was made here.
I have, however seen others make similar type comments to new dog show people and i have watched those new people walk out of the show and never be seen again.
I'm sorry..i started glass be cause it was beautiful and challenging and to get away from crap like this...
Have fun on this thread..this will be the last post i make on it. My question was answered. Ralph is safe.
All that is important to me.
__________________
Becky Noe
Becky Noe Photography & Design
Newbie - But like a sponge To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 8:03pm
|
|
Storm Queen
|
|
Join Date: Aug 30, 2005
Location: SQUIDVILLE
Posts: 8,816
|
|
Quote:
Originally Posted by Frit Diva
This thread will still be here in five years, being read by folks who may be considering buying this item ~ that's why it's important to get the correct info out there.
When I was first starting to do flamework, I waited a year before I could afford a kiln. I remember how frustrating it was! I don't think anybody is being nasty or negative, they are simply trying to protect newer lampworkers from being misled by a vendor who apparently doesn't understand how annealing really works.
Calling this tool a mini annealer is very misleading. Please don't be fooled.
Jo
|
Yes, all of this.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 8:48pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
Quote:
Originally Posted by menty666
I'm not knocking you, Becky; you're new and learning. But I am a bit irked with some of the other folks in this thread who've said that could work as an annealer and have been at this long enough to know better.
Maybe they're just secretly hoping you destroy your own market by selling low quality garbage so they can pick up the sales.
|
I sure hope your nasty comment isn't referring to me! You need to think before you type accusatory shit like this. I find the second paragraph above highly offensive and I am doing all I can to keep from cussing you out. If you were not directing your comments at me, then I apologize. But next time, if you are going to write stuff like this, you really need to name who you are referring to.
The Devardi annealer: Becky might be new, but she's not stupid. She knows this is not the proper annealer to use if she wants to sell her work in the future. It's obvious that for right now she would like to make something larger than a pea and not have it break before she gets it off the mandrel.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2013-03-14, 8:51pm
|
|
Hat or Cake?
|
|
Join Date: Nov 03, 2007
Location: Ontario, Canada
Posts: 610
|
|
Becky, none of these comments are being directed at you. Your question may have been about getting the fins off the bottom of the kiln, but people responded to the root cause of the problem, which is that the product used to anneal your turtle, is unreliable and not terribly-well equiped to do the job it purports to do.
It was a natural progression, given the history of poor experiences people have had.
No one wanted to hijack or re-direct this, I'm sure. Believe me, your comment and disappointment has been noted by many over time on here and the root is often the same supplier.
You will find that the help and encouragement you will find here is incomparable in its scope and nature and you will be amazed at the willingness of people to share.
The comments are to inform. I'm sure we're all happy the turtle survived and I hope your (reliable and efficient) new kiln arrives quickly for you.
Beth
|
2013-03-14, 9:01pm
|
|
Mama said
|
|
Join Date: Aug 28, 2005
Location: Iowa
Posts: 4,134
|
|
Quote:
Originally Posted by wimsey
Becky, none of these comments are being directed at you. Your question may have been about getting the fins off the bottom of the kiln, but people responded to the root cause of the problem, which is that the product used to anneal your turtle, is unreliable and not terribly-well equiped to do the job it purports to do.
It was a natural progression, given the history of poor experiences people have had.
No one wanted to hijack or re-direct this, I'm sure. Believe me, your comment and disappointment has been noted by many over time on here and the root is often the same supplier.
You will find that the help and encouragement you will find here is incomparable in its scope and nature and you will be amazed at the willingness of people to share.
The comments are to inform. I'm sure we're all happy the turtle survived and I hope your (reliable and efficient) new kiln arrives quickly for you.
Beth
|
Excellent.
|
2013-03-14, 9:04pm
|
|
Formerly FishBulb
|
|
Join Date: Dec 05, 2008
Location: Pony Flower Princess Land
Posts: 2,772
|
|
Quote:
Originally Posted by wimsey
Becky, none of these comments are being directed at you. Your question may have been about getting the fins off the bottom of the kiln, but people responded to the root cause of the problem, which is that the product used to anneal your turtle, is unreliable and not terribly-well equiped to do the job it purports to do.
It was a natural progression, given the history of poor experiences people have had.
No one wanted to hijack or re-direct this, I'm sure. Believe me, your comment and disappointment has been noted by many over time on here and the root is often the same supplier.
You will find that the help and encouragement you will find here is incomparable in its scope and nature and you will be amazed at the willingness of people to share.
The comments are to inform. I'm sure we're all happy the turtle survived and I hope your (reliable and efficient) new kiln arrives quickly for you.
Beth
|
^^ This
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
In Soviet Russia, Google searches you.
|
2013-03-14, 9:39pm
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
Since you asked...
Quote:
Originally Posted by Lisi
As far as the Devardi annealer goes, there is no reason why it wouldn't work to anneal a few beads as long as the temperature can be properly monitored. I assume you would have to babysit it. Very closely. You will have much less to worry about when you get your Glasshive kiln.
|
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 10:50pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
Quote:
Originally Posted by menty666
Since you asked...
|
I know what the hell I wrote, and since I do know my WTF I'm talking about, I might as well explain it. I do believe I have sufficient knowledge in many types of kilns aka ceramics, copper enameling, glass fusing and annealing equipment:
As far as that's concerned, then maybe a homemade mailbox annealer with an digital pyrometer is not accurate either?? If the temperature reads correctly with the PROPER temperature monitoring probe AND it is ramped down PROPERLY, then it is annealed! It doesn't matter how small the chamber is inside, as long as the few beads you can get in there do not touch the walls!
I know this shit because my father was an artist for a LIVING, a real professional. He worked with copper enameling and ceramics for more than 40 years. Yes, he built his own kilns, for himself and his students. At least a dozen of them that I know of! Some little bitty tiny testers too!
I'm not saying the Devardi piece of equipment is a properly working annealer, because I really don't know. I haven't used one. But a very small sized annealer can work as long as the temps can be controlled.
Quote:
Originally Posted by menty666
Maybe they're just secretly hoping you destroy your own market by selling low quality garbage so they can pick up the sales.
|
So, have you no further explanation for this, since I "asked", hmmm?? Tell me again how I'm trying to get someone else (newbies) to turn out low quality garbage. I hate to say it, but Becky is finding out just how unpleasant it is with certain people in this forum. I hope she ignores it and stays anyway.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2013-03-14, 10:57pm
|
|
Storm Queen
|
|
Join Date: Aug 30, 2005
Location: SQUIDVILLE
Posts: 8,816
|
|
That Devardi mini annealer doesn't have a door, right? It's just open in the front. If that really is the case there is no way the temp can remain constant enough and accurate to actually anneal.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-14, 11:08pm
|
|
one day at a time
|
|
Join Date: Jun 27, 2005
Location: We are MOVING!!!
Posts: 8,319
|
|
Quote:
Originally Posted by AKDesigns
That Devardi mini annealer doesn't have a door, right? It's just open in the front. If that really is the case there is no way the temp can remain constant enough and accurate to actually anneal.
|
That's true. Now I'm curious, I need to go on the site and look at this thing again. I could swear it had a little door or a "window". Maybe not? I think they mentioned that you could use a piece of fiber blanket to block the door.
__________________
You live in a world of money. Money means choices. No money, no choices. Welcome to reality.
Melody (Marlee Matlin) from Switched at Birth
|
2013-03-15, 1:36am
|
|
The Harbinger of Cuteness
|
|
Join Date: Dec 11, 2007
Location: Los Osos, San Luis Obispo County, California
Posts: 1,465
|
|
Quote:
Originally Posted by Lisi
That's true. Now I'm curious, I need to go on the site and look at this thing again. I could swear it had a little door or a "window". Maybe not? I think they mentioned that you could use a piece of fiber blanket to block the door.
|
For future generations of lampworkers, here is my story with the Devardi mini annealer, especially in reference to covering the front opening of the Devardi mini annealer.
When I tried out the Devardi mini annealer, I built a structure of firebrick all the way around it, stuck a digital pyrometer in it, covered the front with a piece of firebrick, and annealed several sets of about twenty four beads each (I had MONTHS of beads I'd made that needed annealing), making sure to mix in a bunch of transparents all around inside with each batch so I could look at the sampling of transparents in a polariscope to make sure they were annealed. They were. But I had to sit there watching the digital pyrometer and making adjustments to the temp knob for six hours following a precise, scientifically determined annealing schedule as can be found in [Scott] Bandhu Dunham's books.
The ONLY thing REALLY wrong with the Devardi mini annealer is that Devardi mis-represents it. You HAVE to do everything I did in order to ensure properly annealed beads. If you don't at least look at your transparents in a plariscope, you will never know if it worked, and why go to all that trouble if you won't verify the work was effective? If you are willing to do everything I did every time you want to batch anneal your beads, you can save yourself a hell of a lot of money.
Please note the instructions that I received with the Devardi mini annealer specifically stated that you should NOT cover the opening. I was never one for following directions, even if I did read them multiple times.
After all my test runs I returned it and bought a Short Guy. I love my Glass Hive kiln. I would marry it if it weren't illegal in my state. I named him Harry.
__________________
Aimee Moisa
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. #M-191
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 4:51am.
|