|
Tips, Techniques, and Questions -- Technical questions or tips |
2014-03-31, 10:19am
|
|
Member
|
|
Join Date: Sep 24, 2013
Location: Austin, TX
Posts: 87
|
|
I started with Devardi and a Hothead. The Devardi glass is shocky, but otherwise I think it's fine. I use Effetre and CIM glass for the most part, now. Regarding the hothead, I didn't really enjoy lampworking until I got a propane/oxygen torch (Bethlehem alpha) and an oxycon. I had lots of problems with glass getting sooty and gross with the Hothead. It was slow, noisy, and I didn't like riding a big dumb bottle in my crotch the whole time. My advice would be to keep your Devardi glass, but ditch the hothead as soon as you are able to. I think you will find that a mix torch will greatly increase the level of pleasure from working glass. As for a kiln, you might be able to get by without one for a while, but when you get a kiln, you can do fusing, slumping, and casting with it as well. There's a whole world of COE 90/96 sheet glass fun that opens up to you at that point. Check out the class list at http://www.heliosglass.com, which is a studio in my neck of the woods. There's tons of fun to be had with warm glass!
|
2014-04-05, 8:01am
|
Member
|
|
Join Date: Mar 18, 2014
Location: Vermont
Posts: 48
|
|
I'm a newbie here but I've bought a lot of my supplies and glass from Devardi and I will say that their glass is SHOCKY! That said, I've learned very quickly to be careful introducing a cool rod to flame. If anything I think it's done me a service because now working with effetre etc. seems easy!
I love love love their colors, and their service. I emailed them last night and Natasha got right back to me- we even had a nice chat about making frit blends. If I didn't absolutely love their colors I probably wouldn't chose to work with their glass but I have had excellent service from them and all the tools I've purchased have been excellent.
PS, where can one buy the annealing bubbles? I need enough to fill a 1.5 qt crock pot I currently have filled with vermiculite.
|
2014-04-05, 9:51am
|
|
Slogan Challenged...
|
|
Join Date: Mar 21, 2009
Location: Maricopa, Arizona
Posts: 6,287
|
|
Annealing bubbles are at http://www.artcoinc.com/
I recently switched to those and I've been REALLY happy. I'm not sure how much will fill that crockpot but the bags are pretty good sized...I got two and that will last me a while.
__________________
Kristin ~
Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Etsy: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-04-06, 6:31am
|
Member
|
|
Join Date: Mar 18, 2014
Location: Vermont
Posts: 48
|
|
Awesome, thank you! I emailed them.
|
2014-04-08, 3:48pm
|
|
Senior Member
|
|
Join Date: Jul 15, 2005
Location: Eastern West Virginia
Posts: 2,936
|
|
Welcome! Yes, Devardi has some real drawbacks, but they also have some lovely colors that are not available in 104 anywhere else. I've gotten their frit in the past as well for the colors, and shocking is not a problem there. I really like the Fusion bead release - it stays good on the mandrel for a long time, and I have not had any issues with either getting the beads off the mandrel, or getting the release out of the bead.
Please be sure you have good ventilation where you are torching! Safety really is important, you only have one set of lungs so you don't want to mess them up. Also keep in mind that the silver glasses like from Double Helix and Striking Color usually do not play nicely on a HotHead, so don't spend your money on them until you get a dual-fuel torch.
Have fun, good luck, and show us some of your beads!
__________________
Carol O. (Cricket with 5 lpm oxycon)
"The miracle isn't that I finished. The miracle is that I had the courage to start" John Bingham
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-04-09, 1:00pm
|
Senior Member
|
|
Join Date: Apr 08, 2010
Location: The warmer half of MN
Posts: 155
|
|
I started with devardi and a hothead. I think it's an excellent way to begin. I found that i HAD to have a rod warmer - everything became instant frit without - but with the rod warmer, their glass wasn't shocky at all. In time, if you get really addicted, and you spring for a dual-fuel torch, and an O2 concentrator, you've spent so much money it doesn't really matter anymore, then the expensive glass is lots of fun. When you're starting out, the really pricy stuff is an utter waste of money, and the pricy stuff is not always better. The Devardi people have good customer service, and a lot of great videos. Don't worry - you've done fine.
|
2014-04-09, 1:01pm
|
Senior Member
|
|
Join Date: Apr 08, 2010
Location: The warmer half of MN
Posts: 155
|
|
I would also second the annealing bubbles. Much better than the blanket.
|
2014-04-09, 3:59pm
|
|
Senior Member
|
|
Join Date: Aug 02, 2007
Location: Nahant Ma
Posts: 1,901
|
|
I am not trying to disagree with anyone here and I have not used the bubbles, I make soft glass the size of pendants and only batch anneal and have not had one break because I used fiber blankets. I do use thick fiber blanket and it last almost forever.
Bob
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
e-mail: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-04-09, 9:23pm
|
|
Member
|
|
Join Date: Nov 09, 2011
Location: Fallon, Nevada
Posts: 84
|
|
Chiming in on the annealing bubbles...they work great. I used to put all my beads in them...and not in a crock pot either. Bubbles in a large tin can! Put hot bead in bubbles while still on mandrel...wha-la...a nicely cooled down bead in about an hour. I even took them off the mandrels and never broke a one. I finally got a Kingpin Kiln which is great but I may go back to the annealing bubbles and batch anneal when I have enough beads to fire up the kiln. One small bit of advise...the bubbles WILL stick to the bead if the bead is right out of the flame. Waft it around for a few seconds and THEN put it in the bubbles.
__________________
Carol
StewArt Glass and Gem
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2014-04-09, 9:29pm
|
|
Member
|
|
Join Date: Nov 09, 2011
Location: Fallon, Nevada
Posts: 84
|
|
Oh...to get bead off the mandrel, use a small pair of 'vise grips'. Soak the bead and mandrel for awhile in water then really tighten the 'vise grips' down on the mandrel and twist the bead off. Oh...and don't let the bead release go down the sink. I use a small screen to catch the bead release in the sink drain. Or clean in a dishpan and discard the bits of bead release in the garbage.
__________________
Carol
StewArt Glass and Gem
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 9:24am.
|