|
Safety -- Make sure you are safe! |
2005-12-13, 8:01pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Maple Valley WA
Posts: 7,064
|
|
Weird smell
Hi ya'll. I set up my new torch (mini cc), oxygen concentrator and propane tank this weekend. Yes propane is outside, yes I have checked all connections, no leaks. I smell bleach. It is NOT a gas smell like propane, my mom agrees it smells like bleach. Do you think it could be something in the reconditioned concentrator?
Thanks for reading and any tips you may have.
__________________
Lara
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Become a fan on Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-12-13, 8:06pm
|
|
~ a.k.a. Sharlee22 ~
|
|
Join Date: Aug 27, 2005
Location: Somewhere in the middle, QC, Canada
Posts: 1,103
|
|
Smells like bleach here too...
Dunno... And I have a concentrator too.. Propane is outside.
__________________
Liz To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-12-13, 8:38pm
|
|
Senior Member
|
|
Join Date: Jun 15, 2005
Posts: 2,251
|
|
The bleach smell is nitric oxide. It is a result of burning propane and oxy. This can cause you to have trouble breathing, headaches, etc. Check your ventilation.
Pam
|
2005-12-13, 9:54pm
|
|
Gentleman of Leisure
|
|
Join Date: Jun 10, 2005
Location: A Little Bit West of Yosemite Valley
Posts: 5,200
|
|
Yes the bleach small is NOx or NITROGEN OXIDE..... It is a by product of combustion and it is a hazard and is toxic... Yes check ventilations. Pretty good chance you do not have enough volume in exhaust air flow or poor makeup air sourse...
http://www.isgb.org/info/safety/nox.shtml
Dale
__________________
You can lead a person to knowledge, but you can't make them think. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Vendor-Artist-Studio-Teacher Registry To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
San Francisco - A Few Toys Short of a Happy Meal
|
2005-12-14, 11:48am
|
|
Floral Obsessed
|
|
Join Date: Oct 17, 2005
Location: Winnipeg, Canada
Posts: 1,375
|
|
Nasty stuff! I hope you noticed the smell before you started to feel sick - sore throat and lungs, burning eyes, headaches, fatigue... It's good that you posted here.. definitely don't torch again until you fix your ventilation problems! Good luck and please post your questions and results!
Sincerely - Heather
|
2005-12-14, 10:24pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Maple Valley WA
Posts: 7,064
|
|
Thanks ya'll. Nope, no symptoms, yet. HMMMMM Here I thought my ventaliation was good. ACK. I think Dale's make up air is probably the answer, my ventalation sucks really well but I do need to get more air into the garage.
Weird, why does NO smell like bleach? Very interesting. I like the why.
Thanks so much.
__________________
Lara
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Become a fan on Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-12-15, 5:13am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
Lara - what is your current ventilation setup? Most ventilation problems can be traced to a couple of key issues:
1) Not enough CFM (cubic feet per minute) exhausted outside - yes, some folks think that a recycling kitchen fan (one that does not have ducting) is safe (after all, you use them in a kitchen, right?).
2) Not enough fresh air - the fresh air system MUST be able to provide the same amount of air that is being exhausted, and it is usually a good idea that it is actually capable of providing MORE.
3) Exhaust duct located too close to fresh air intake - must be a minimum of 10 feet apart
4) Use of non-standard ducting materials or poor design of the ventilation/ducting system - you can have a high CFM fan, but if the duct design is faulty or the material are 'non-standard', you are NOT moving the amount of air that the fan is capable of.
These are the major issues that are usually found with most non-functional exhaust systems.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-12-15, 9:07pm
|
|
Senior Member
|
|
Join Date: Jun 16, 2005
Location: Maple Valley WA
Posts: 7,064
|
|
Thanks Mike. I'm going to look at in closer this weekend. I have a couple ideas on where it is faulty
I'm thinking a little from colum 2 and a little from colum 4. My dad put together this system and he is an engineer, so questioning it was not very useful, but now that I have a name to the smell, I think questioning will go over just fine.
I appreciate everyone's input.
__________________
Lara
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ** To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Become a fan on Facebook: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2005-12-16, 5:11am
|
|
Safety ALWAYS
|
|
Join Date: Jun 10, 2005
Location: Sauk Rapids, Minnesota
Posts: 2,401
|
|
Oh goodness Lara - go back over the ventilation threads here on LE and over on AGF ( www.artglassforum.com) . I've written many thousands of words on ventilation over the past six to nine months or so. Basically, it boils down to this:
Use as large of ducting as possible (8" or better)
Use smooth sided galvanized metal ducting
DO NOT use flexible metal or plastic ducting
DO NOT reduce or increase the ducting size at any point in the duct run
Make the duct run as straight and level as possible
Try to avoid sharp bends, use 45 degree bends where possible
If possible, have the entire system 'numbered out' - measure the face opening of your hood, the total length of the duct run, and the number of bends and what angle - then shoot me an e-mail. I'll send back the CFM requirements for your hood, and the recommended diameter of the ducting for the installation you've got.
For fresh air, an 8" duct provides about 350 CFM of "free flow" fresh air. If you need more, you can increase the size of the duct, or you can power push fresh air in (which I personally don't recommend).
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2021-11-29, 3:33am
|
Junior Member
|
|
Join Date: Nov 28, 2021
Location: B.F.E, Wyoming
Posts: 5
|
|
Omg! Same smell!
I’m super glad to finally figure this issue out! It’s only been a couple of times I’ve smelled bleach after a session but I will definitely ventilate adequately before I fire up again … so glad to know this info! Who woulda thunk, No2 would smell like bleach how strange …. Wowza!!
|
2021-12-14, 4:24am
|
Junior Member
|
|
Join Date: Nov 28, 2021
Location: B.F.E, Wyoming
Posts: 5
|
|
Ventilation Fixed!
Fixed the ventilation situation, it’s nice to know people who work sheet metal and heating/a/c work for a living! They hooked me up on a tiny budget of $4…. Yes that’s correct, $4 is what I had to my name and it’s all it costed me— what friends I have that they’d solve my ventilation problems outta the kindness of their hearts. 💖 That bleach smell is no more. Thanks to everyone on here and I am glad to see this thread helping so many others find out about nitric oxide!! 🙂
|
2021-12-14, 7:31am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
The LE MoJo is some powerful stuff.
Glad to hear you can feed your addiction without slowly killing yourself or any one else for that matter.
Now you get to learn how to take and up load pictures so we can all learn from your experience.
There is a Studio thread as well as a Safety thread and pictures tell stories so much fast than our fingers can.
__________________
The Zombie Apocalypse is Upon Us.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 8:56am.
|