Lampwork Etc.
 
Mountain Glass Arts

LE Live Chat

Enter Live Chat

No users in chat


Donate via PayPal to donate@lampworketc.com

Beads of Courage


 

Go Back   Lampwork Etc. > Library > Safety

Safety -- Make sure you are safe!

Reply
 
Thread Tools
  #1  
Old 2017-10-09, 9:14pm
cakey's Avatar
cakey cakey is offline
Senior Member
 
Join Date: Jul 16, 2005
Location: Sheidan, Oregon
Posts: 302
Default Another ventilation question

Is a 110 cfm bathroom fan suspended above torch and ducted directly out window behind it adequate? I'm using a minor burner.
this is in the garage.
Thank for helping
__________________

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #2  
Old 2017-10-10, 2:10pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 1,777
Default

Not even close.

You need 8 times that cfm with even the very best designed Bailey box and a 6 foot vent duct above the roof of the garage and no wind outside at all.

This really is very important.
You will be decorating the inside of you lungs with the fumes from all those wonderful colors.

We have extensive conversations about how much is needed and how to figure out what you need for your situation.

Each persons needs is going to be different and it is a little difficult to trudge through the details but you only have to figure it out once.

Good luck and please keep asking questions.

We learned about the hazards of this stuff by reading the documented illnesses of folks that have been doing it wrong for decades.
They often paid the ultimate price so we could learn not to injure ourselves.
__________________
So, What Do We Do Now? We continue to try to make a difference when and where we can. Because that's what we do.
Reply With Quote
  #3  
Old 2017-10-10, 3:09pm
Croft Eeusk's Avatar
Croft Eeusk Croft Eeusk is offline
Queen of the milo field
 
Join Date: Jul 30, 2012
Location: In the middle of US and the middle of forty acres
Posts: 1,761
Default

Here's a ventilation tut by Whit Slemmons:
http://www.andreaguarino.com/read-me/

If you use the 'Search' function at top of page w/'ventilation' as search term a number of posts will result including these:
http://lampworketc.com/forums/showth...t=ventillation
http://www.lampworketc.com/forums/sh...ht=ventilation

dj
__________________
Dance all you want, but keep one hand on the wheel.
'Opinions are like assholes. Everyone has them, but you don't have to stay in the same room while they fart.' - Jack Abbott
Reply With Quote
  #4  
Old 2017-10-18, 10:04am
JimW JimW is offline
Junior Member
 
Join Date: Jul 14, 2014
Posts: 19
Default

Here's a suggestion, if you want to go the route like the ventilation tutorial above.

Use a 6in to 8in duct adapter for a funnel.
A little bit of 6in bendable ducting between the funnel and solid duct so you can adjust the funnel position.
Some 6in solid ducting and the minimum number of 90/45 deg elbows you can get away with.
A decent 6in inline duct fan, like they use for grow tents.
like this Duct Fan at Amazon

I actually cut a circle in a 6 foot folding table I use to put the vent vertically and hold it into place.

I have it set up where I have to crack open the garage door, connect a section of duct to go out the door and put the fan on the end to suck out any potential residuals and I use a remote Christmas light switch to turn the fan on and off from my bench so it doesn't run all the time.

In the picture, you can see where I split the flow to have vents for me and my wifes' torch, sitting opposite of each other.

This works great for us and if your interested I can post more pics.
Attached Images
 
Reply With Quote
  #5  
Old 2017-10-18, 1:30pm
notrhydon notrhydon is offline
Member
 
Join Date: Oct 04, 2016
Posts: 50
Default

Jim, thanks for the photo! I'm just now setting up my 800cfm 8" fan and have been stumped trying to figure out a setup for the funnel. I've already got a board cutout to cover a window with the blower right in it.
__________________
Ryan
*Soft glass marbles on a National 8M because I'm slightly less patient now*
Reply With Quote
  #6  
Old 2017-10-20, 2:04pm
JimW JimW is offline
Junior Member
 
Join Date: Jul 14, 2014
Posts: 19
Default

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 6:21pm.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Your IP: 54.227.51.103