|
Tips, Techniques, and Questions -- Technical questions or tips |
2015-06-04, 2:25pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Cleaning bead release - newbie (still)
Jeez, sorry to have to ask such an inane question but how clean is clean enough concerning bead release on donut beads? I'm using a simple hand held tool and I dip it in water as I clean the release with the tool. Do the holes have to be completely free of bead release prior to annealing? I'm finding some beads I made (that are not yet annealed) still have bead release in the holes.
Thanks!
Christine
|
2015-06-04, 2:55pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
It won't matter if the bead release is still there during your annealing cycle.
But you will want to get it all out before you sell them or give them away.
I found out that I could use a wet finger tip to smooth the surface of the bead release before making the bead and that helped make it easier for me to get a better surface inside the hole and thus easier to get it all out latter.
__________________
The Zombie Apocalypse is Upon Us.
|
2015-06-04, 2:56pm
|
|
Loving learning
|
|
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,654
|
|
You can clean them after annealing. I keep my bead in water as I'm cleaning to make the release come out into the water, and out of my way.
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
|
2015-06-04, 2:56pm
|
Senior Member
|
|
Join Date: Mar 25, 2013
Posts: 327
|
|
From what I understood, and how I do it, there is no problem in annealing it with bead release still in there. I generally batch anneal, and sometimes I clean them before, sometimes I just take them off the mandrel to anneal and clean them later.
|
2015-06-04, 3:14pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Thank you!!
|
2015-06-04, 7:34pm
|
|
Corgi Cult Member
|
|
Join Date: Jan 10, 2006
Location: Central Illinois
Posts: 3,723
|
|
Do you have access to a Dremel? A tapered diamond bit on a Dremel works wonders. Hold the bead under water to clean. Don't dispose of the water down your household drain unless you are close friends with a plumber and he owes you a favor.
__________________
Kathy
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-06-05, 3:27pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Thanks, Artwhim, yes, we have a Dremel. That bead release is nasty!
|
2015-06-05, 10:42pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
You can search through the threads here and find conversations about folks opinions on the different bead release formulas as well.
ETA: I am partial to Foster Fire Smooth and Tuff myself. I have tried others that would either not stay on the mandrel when hot or would not come out of the bead when cold.
Oh and don't use softened water when your bead release dries out a little. The salt changes the way the release works.
__________________
The Zombie Apocalypse is Upon Us.
|
2015-06-06, 4:15pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Thanks, Speedslug. We are planning to soften our water so much appreciated!
|
2015-06-07, 1:00am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
Reverse Osmosis water filters clean softened water well enough to use to add to bead release without any problem.
Oh and another trick I found was to keep my bead release bottle stored up side down.
This keeps the cap seal wet and prevents the stuff from dying out on you.
__________________
The Zombie Apocalypse is Upon Us.
Last edited by Speedslug; 2015-06-09 at 9:02am.
Reason: Changed with to without. It matters that the words actually get on the page instead of just in my head.
|
2015-06-09, 7:22am
|
Junior Member
|
|
Join Date: Jul 30, 2011
Posts: 26
|
|
Quote:
Originally Posted by Speedslug
It won't matter if the bead release is still there during your annealing cycle.
But you will want to get it all out before you sell them or give them away.
I found out that I could use a wet finger tip to smooth the surface of the bead release before making the bead and that helped make it easier for me to get a better surface inside the hole and thus easier to get it all out latter.
|
What a swell idea. I look forward to trying that!
|
2015-06-10, 2:12pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Cleaning bead release - newbie (still)
I love the idea of storing the stuff upside down, thanks, Phil!!
|
2015-06-26, 6:29am
|
|
Glass-aholic
|
|
Join Date: Mar 21, 2007
Location: CT, tolland CT
Posts: 4,332
|
|
Lots of people prefer different bead release based on where they live too. Something about the air, humidity, maybe the water.. Not sure but it's very true. Where are you from?
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|
2015-06-26, 8:11pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
Cleaning bead release - newbie (still)
Thanks, Jaci. Illinois, the only state in the Union that has incarcerated 3 of its former Governors. 😒
|
2015-06-26, 11:36pm
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
? Nearer the lake or further inshore?
I would be willing to bet that most of us still have one or two partly used bottles of different bead release brands that were part of the search for the kind that we liked best.
Good luck in your hunt.
ETA: Yours are just the governors that got dumb enough to leave traces and it's still early yet.
__________________
The Zombie Apocalypse is Upon Us.
|
2015-07-02, 9:35pm
|
|
Glass-aholic
|
|
Join Date: Mar 21, 2007
Location: CT, tolland CT
Posts: 4,332
|
|
Foster fire has great sample sizes on their etsy shop too a few oz cheep to try. I have used foster fire and liked it in the past. It is pretty easy to get beads off, still strong in the flame and not to bad to clean. Didn't eat up the diamond bits at all. I think I cleaned 5000 plus beads with foster fire and the Dremel bit was still going strong. Sme of these other brands eat at the diamond bits more. I didn't realize this until later. But when you buy the good bits (Beadreamer by art in the round) at 30 bucks it sucks when it's just disappeared and you can't figure out why it's gone so soon!!
__________________
Minor 10lpm Oxy-Con + HH on Propylene . . . . . .
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. . To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. hand dyed silk ribbons in many colors!
WASHERS & TOPPERS - layering components for interchangeable glass topper and to use in other jewelry/metalwork.:
|
2015-07-03, 9:40am
|
Junior Member
|
|
Join Date: Apr 10, 2014
Posts: 8
|
|
Bead Release and reamer
THIS IS SUCH A GREAT SITE!! I've been looking for a long reamer for my rotary tool and just ordered it from Art in the Round! I anneal my beads still on the mandrels, soak in a bowl of water; remove the beads under running water and soak the beads in water to be sure the release doesn't become airborne; have heard that the addition of vinegar is helpful but can't see the difference. I use a small battery powered dremel (Walmart, $16) with a cylindrical diamond bit into the hole. Have nicked the hole with the shank if the bead is longish, so am very excited to get the long bit!
Thanks, everyone for sharing so willingly!!!
|
2015-07-04, 7:45pm
|
|
Christine
|
|
Join Date: May 16, 2015
Location: Chatham, Illinois
Posts: 272
|
|
I live a few miles south of Springfield Illinois, Speedslug.
I grew up in St. Louis though.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 6:31pm.
|