|
Studio -- Show us your studio setup |
2015-05-22, 4:46pm
|
|
Queen of the milo field
|
|
Join Date: Jul 30, 2012
Location: In the middle of US and the middle of forty acres
Posts: 1,885
|
|
Woodstove in studio?
Can you heat a lampwork studio w/a woodstove? Propane stored outside, of course, & oxycon.
thanks
dj
__________________
Dance all you want, but keep one hand on the wheel.
Sometimes I swim, sometimes I sail, but mostly I just try to stay afloat.
|
2015-05-22, 5:18pm
|
|
Ready to hit the road
|
|
Join Date: May 06, 2006
Location: Zimmerman, MN
Posts: 2,418
|
|
I don't see why not. My studio is open to my living room, and I have a woodstove in there.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. • To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-05-22, 6:09pm
|
Member
|
|
Join Date: Jun 16, 2009
Posts: 57
|
|
If you have powered ventilation for your glass work station--and you should-- you run the risk of pulling smoke and fumes from the woodstove to your work station and you.
|
2015-05-22, 7:31pm
|
|
honorary bead lady
|
|
Join Date: Jan 14, 2008
Location: Mostly the doghouse
Posts: 5,180
|
|
I do, But I have to make sure a window is open Or I will back draft the flue and fill the shop with smoke!
__________________
David To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-05-22, 8:06pm
|
|
Queen of the milo field
|
|
Join Date: Jul 30, 2012
Location: In the middle of US and the middle of forty acres
Posts: 1,885
|
|
Yup, the smoke was one of the things I was wondering about.
Hum. May have to check the condition of the one in the barn; it's an outside stove & I'm inclined to think it might be a tad big. Since I've been heating the house w/woodstoves for about 40 years we have a variety not in use. And then, we have left over concrete blocks so I could always toss together a little house for one of the others & just use a blower in to push heat.
All this is early planning stages, mind you. But I've got a burr under my saddle for a Guest Bunkie/Studio addition
dj
__________________
Dance all you want, but keep one hand on the wheel.
Sometimes I swim, sometimes I sail, but mostly I just try to stay afloat.
|
2015-05-23, 2:59am
|
|
Entropy increasing....
|
|
Join Date: Nov 12, 2005
Location: In a box of paints
Posts: 25,098
|
|
We had one in the garage for years. Actually, in various garages. It works really well. Wood heat is so nice, just quietly radiating serious heat. I miss wood heat. Not the mess, of course, but that heat that just radiates to your bones.
__________________
"I am an artist… I am here to live out loud." Emile Zola
|
2015-05-23, 4:14am
|
|
kinda torching....
|
|
Join Date: Mar 26, 2013
Location: Pennsylvania
Posts: 301
|
|
If you did decide to put one in the studio, you could start your fire a couple hours in advance to get a good heat soak into the metal and room, then snuff the fire out and relight it after you cut the ventilation for an extended lunch break. Putting the fire back out when your ready to start torching again. Kind of a pain in the ass but might work for you?
__________________
Jeremy To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-05-23, 4:31am
|
|
Phill
|
|
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
|
|
I think if you have separate make up air for the wood stove going directly into the fire box and separate make up air piped right to your torch bench the two systems should not interfere with each other at all.
Of course you will want to test them four ways from Sunday and ensure that each exhaust chimney has plenty of clearance and you will want to practice safe fire starting habits of getting the flue nice and toasty to ensure proper draw up the pipe.
But as long as you know how to operate a chimney (something I was never taught specifically as a kid and have had to learn piece meal over the years ) you should not have any problems working the two systems together in the same room.
__________________
The Zombie Apocalypse is Upon Us.
|
2015-06-06, 12:11pm
|
|
hi ho hi ho its off to ..
|
|
Join Date: Oct 27, 2007
Location: Odessa, Ontario, Canada
Posts: 289
|
|
I had a woodstove in my studio, 700 ft square outbuilding and removed it in favour of a pellet stove. A lot less work, the same nice dry heat, and no ash floating around the studio after I cleaned out the stove and munging up the glass. It pulls combustion air directly from the outside and a 40lb bag of pellets heats the studio for 2 and a bit days. I also like that I do not have to buy a seasons worth of spilt wood in the fall I can buy 5 or 10 bags of pellets at a time.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. People who call me weird think I should take it personally. if you really want to upset me you should call me normal !!!
on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2015-06-06, 3:24pm
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
If I had the time and money to tear apart my studio, I'd do one of these:
http://www.instructables.com/id/How-...t-Mass-Heater/
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 2:36am.
|