|
2010-02-21, 10:22pm
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
Betta and M-5 and boro?
I have a Bobcat and an M-5 concentrator. I use it for soft glass and smaller boro things. While the boro is do-able on the bobcat I feel like it has three draw backs
1) it doesn't heat the boro enough (my stringers are lumpy)
2) the bobcat doesn't have a big wide flame (for inside out beads)
3) the bobcat doesn't have a small narrow flame.
I'd like to upgrade but I don't really have room for another concentrator or the big bucks for a huge torch.
Could I buy a betta and run it on my M-5? Would I see an improvement on my boro melting vs. the bobcat or would it be the same? Does the betta have a wider and/or narrower flame than the bobcat?
Is there another torch that will run with the M-5 that does boro well?
Or should I wait until I save up enough for an M-10 or M-15 and what other torch?
Any help you give will be most appreciated!!
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-02-21, 10:43pm
|
|
Senior Member
|
|
Join Date: May 04, 2007
Location: San Jose, CA
Posts: 1,212
|
|
My first suggestion would be to upgrade your oxygen. Either add a second oxycon, or get a larger one. I suspect that with more oxygen, you will think that you've got a new torch!
Even if you do decide to upgrade your torch later, you will still want/need more oxygen ... regardless of the torch you get.
Malcolm
PS: Have you tried your torch (or one just like it) on bottled oxygen? Just for comparison?
__________________
ARTCO
Artist's Reliable Tool Company
Website: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Email: To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Phone:+1.408.288.7978
|
2010-02-22, 12:22am
|
|
Senior Member
|
|
Join Date: Jun 26, 2006
Location: Vancouver Washington
Posts: 3,986
|
|
Betta torch works fine on one concentrator but it has the same size of flame at the bobcat as far as the width. It does do nice pinpoint flame though. I agree with Malcolm about the oxygen. I do boro with my betta but it could be hotter so really I don't think it would do much more than what you are getting maybe a little hotter but not much in my opinion If you were to want to get a different torch that would run on one concentrator I would get a cricket or save and get want I want a scorpion
__________________
Lori
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-02-22, 11:18am
|
|
The Venerable Bead
|
|
Join Date: Jul 22, 2005
Location: Rhode Island
Posts: 1,951
|
|
I have a betta on natural gas and 2 m-20's it's more oxygen you need. the bobcat will be fine for boro for small beads and pendants with more oxy. you can melt boro on a minor if you have enough heat. save for another oxycon. get an M-15 at the minumum and 2 for maximum meltage
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. Paula AKA The Venerable Bead To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"I believe in pink, I believe that laughing is the best calorie burner. I believe in kissing, kissing a lot. I believe in being strong when everything seems to be going wrong. I believe that happy girls are the prettiest girls. I believe that tomorrow is another day and I believe in miracles."
— Audrey Hepburn
flaming away on a betta, natural gas, and 2 M-20's
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-02-23, 1:22pm
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
Thank you all for the info. I'll save up for at least an M-10 if not an M-15. After I see how the bobcat does with more oxygen I'll decide if I need another torch with a more adjustable flame size.
Thanks!
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-09-30, 8:35pm
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
I finally got my pennies saved and I added an M-15 to my set up. I am running the M-15 and M-5 together so I have 12 lpm of oxygen.
Now I'm trying to get to the hottest neutral flame that I can get on my bobcat.
What pressure should I set the propane tank at?
If I crank up the oxygen the flame hisses and I have always read that the flame shouldn't be hissing.
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-02, 7:32pm
|
Senior Member
|
|
Join Date: Jul 18, 2007
Posts: 568
|
|
The m15 and m5 have 10psi difference in their pressures - could cause damage, I'd do research if I were you.
|
2010-10-03, 1:30pm
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
Are you saying I can't hook the M15 and the M5 together? I have never heard of this before.
Can anyone point to a thread where this is discussed?
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-03, 3:22pm
|
|
Senior Member
|
|
Join Date: Mar 03, 2006
Posts: 931
|
|
Quote:
Originally Posted by jgraff
Are you saying I can't hook the M15 and the M5 together? I have never heard of this before.
Can anyone point to a thread where this is discussed?
jgraff
|
He is right. The PSI should be within 5 psi of each unit to operate with the optimum output. An M15 might void out an M5. One way to tell is the watch the flow ball when you connect the 2 together. The M5 would most likely go to a much lower flow than 5 lpm. An M10 and an M15 should operate together without losing any lpm. jack
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
866-955-0200
3 year warranty & Life Time Support
PayPal address To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-04, 10:47am
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
As I understand it the gauge on the M5 should never read over 4 LPM and the gauge on the M15 should never read over 8 LPM (stickers were put on the units when I purchased them). This would mean that my total LPM is 12 and the units are exactly 5 LPM apart.
Is this safe?
I do not see a drop in LPM on either unit when they are operating.
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-04, 10:49am
|
Senior Member
|
|
Join Date: Oct 29, 2007
Location: SF Bay Area
Posts: 216
|
|
whoops. Bad math. The units are 4 LPM apart.
jgraff
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-10-04, 5:06pm
|
Senior Member
|
|
Join Date: Jul 18, 2007
Posts: 568
|
|
LPM isn't the issue - it's PSI.
LPM is volume, PSI is pressure.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 12:03pm.
|