Just a quick FYI -
If you use white vinegar (or a mix that is similar) to clean bead release from bead holes, yes, it will clean out marginally faster. But it will also cause your mandrels to corrode faster.
Water works just fine with a small cheap-from-Harbor-Freight diamond file and only takes a second or two longer.
If you have a bead that is stuck you can soak the mandrel in vinegar and it will break down the bead release, allowing you to remove the bead. This can take anywhere from 15 minutes to 4 hours. I have used it for the hollow bead-inside-a-bead.