Lampwork Etc.
 
AKDesign

LE Live Chat

Enter Live Chat

No users in chat


Jelveh Designs - Glass Beads Torched One-by-One

Beads of Courage


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2018-09-01, 8:08am
DanielJ DanielJ is offline
Junior Member
 
Join Date: Jul 28, 2018
Posts: 3
Default Perfecting my initial footprint

What’s the secret for laying a “perfect” glass-to-mandrel footprint when starting a bead? I always seem to end up with one area of my initial footprint making less contact to the mandrel than the rest, which results in uneven rounding.

Thank you in advance for your feedback. Much appreciated.

Dan
Reply With Quote
  #2  
Old 2018-09-01, 10:10am
kansassky kansassky is offline
Dix Harrison
 
Join Date: Mar 31, 2009
Location: KCKS - But my heart is in Scotland
Posts: 509
Default

Touch your melted gather (lightly) to the FRONT of the mandrel while turning.

NOT to the top of the mandrel.
__________________
“Cometh the hour. Cometh the women.”
Facebook: Kansas Sky Studio Dix Harrison
Reply With Quote
  #3  
Old 2018-09-02, 6:12am
neagle's Avatar
neagle neagle is offline
Peerless Thread Killer
 
Join Date: Jul 20, 2007
Location: Mt. Chokula
Posts: 1,148
Default

Practice, practice, practice. Nothing beats it. You will get better; it's just a matter of doing it a lot.
__________________
Check out my Etsy shop:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.

Reply With Quote
  #4  
Old 2018-09-02, 11:07am
echeveria's Avatar
echeveria echeveria is offline
Senior Member
 
Join Date: Aug 31, 2006
Location: Knoxville, TN
Posts: 1,951
Default

Is your mandrel hot enough when you first touch the glass to it? Glass does not stick to a cold mandrel. And with practice, you will learn to round off a wonky footprint. But is sure is easier when the glass goes on well to start!
__________________
Kathy
Reply With Quote
  #5  
Old 2018-09-04, 10:36am
Sue in Maine's Avatar
Sue in Maine Sue in Maine is offline
Senior Member
 
Join Date: Jun 14, 2005
Location: The Rocky Coast State!
Posts: 6,565
Default

I am one of the rare birds who does not have a good footprint. This thread might interest you.

http://lampworketc.com/forums/showth...ght=smootprint

Sue
__________________
Sue Walsh
The past is history,
The future is a mystery
and the present is a gift.

Last edited by Sue in Maine; 2018-09-04 at 7:16pm.
Reply With Quote
  #6  
Old 2018-09-04, 4:04pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,157
Default

I tend to work a flatter, coiled up, disk shape and then sneak up on the best foot print with heat control melting it slowly down into shape.

For me, it's mostly a matter of patience, patience, patience with my practice, practice, practice.
__________________
Perpetually Pessimistic. I wish I was Pleasantly Surprised but I'm not surprised anymore.

Last edited by Speedslug; 2018-09-04 at 4:06pm.
Reply With Quote
  #7  
Old 2018-09-05, 4:04am
Mesnik Mesnik is offline
Senior Member
 
Join Date: Sep 04, 2014
Location: Michigan
Posts: 211
Default

https://www.heathertrimlett.com/foundation/
Reply With Quote
  #8  
Old 2018-09-13, 8:36am
DanielJ DanielJ is offline
Junior Member
 
Join Date: Jul 28, 2018
Posts: 3
Default

Thank you for your feedback!
Reply With Quote
  #9  
Old 2018-09-15, 4:16am
Al Miaco's Avatar
Al Miaco Al Miaco is offline
Member
 
Join Date: Sep 24, 2016
Posts: 60
Default

I agree with Speedslug.

Make a coil/disc that you melt down to become your bead.

This method gives you great puckers. It also teaches heat control as you put on the glass and it is easier to melt smaller volume and make multiple wraps. It is also useful for other techniques. good luck and practice.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 1:15am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Your IP: 3.231.220.225