Bluebird boro anneal schedule?

AVTrout · #1 2007-06-09, 10:22am

Does anyone use a Paragon Bluebird to anneal their boro? If so, does anyone have a schedule to share? Thank you!

meadowesky · #2 2007-06-09, 7:45pm

you can call me and I can walk you through it
309 368 6806

AVTrout · #3 2007-06-09, 11:05pm

Thank you thank you, I think I called you when I set up my kiln for COE 104. Was that you? I really appreciated the help and the program is great. I'll call ya tomorrow! Alexis

meadowesky · #4 2007-06-09, 11:38pm

okay I remember now

I usually ramp up to 1050 and hold for my usual work time.
ramp up to 1075 for striking hold for 30 minutes
ramp down to 960 degrees your drop rate will be 60 degrees an hour.
your hold time on that is 30 min.
then I ramp down to 500 degrees at a rate of 150 degrees an hour. I dont hold and the kiln goes off.
I will warn you to let your kiln reach 1050 before you start having things sticking out of the doors. it will probably fault out.