|
The Dark Room -- Photo Editing and Picture Taking. Advice, tutorials, questions on all things photoshop, photo editing, and taking pictures of beads or glass. |
View Poll Results: Which is better; Cloud Dome or Table Top Cube?
|
Cloud Dome
|
|
14 |
14.29% |
Table Top Cube
|
|
84 |
85.71% |
2009-01-18, 4:23pm
|
Junior Member
|
|
Join Date: May 31, 2006
Posts: 20
|
|
Hi there. I got some great info at tabletopstudio.com. They don't compare the 2 different products but they show the cube. They sell everything, but honestly I bought a cube on Ebay for $20. Good luck.
|
2009-01-19, 10:18am
|
|
Everybody Needs Beads!
|
|
Join Date: Nov 09, 2005
Location: Des Moines, Iowa
Posts: 1,524
|
|
They have basically the same light set up at Harbor Frieght for $10 less...
http://www.harborfreight.com/cpi/cta...emnumber=65797
__________________
Tera Belinsky-Yoder
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Beadygirlt. on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-01-19, 11:26am
|
Senior Member
|
|
Join Date: Apr 20, 2007
Posts: 346
|
|
Thanks for the info. Tera as I was planning on heading out to Harbor Freight.
Debbie
|
2009-01-20, 8:17am
|
Lampworker
|
|
Join Date: Jul 06, 2007
Location: Oregon
Posts: 211
|
|
i have a cloud dome and like it.
tip: use some short 2x4s to raise the dome up off the table and you get enough light in to have a little glare so your glass doesnt look matte.
|
2009-04-03, 10:49am
|
Senior Member
|
|
Join Date: Aug 08, 2007
Location: coquitlam BC Canada
Posts: 1,501
|
|
Looking for the same or equivelent quality light tent set up in Canada.Shipping ect from the the states is killer,anybodys help is appreciated.
Karen
Volkano Exotik
|
2009-04-03, 5:20pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by volkanokaren
Looking for the same or equivelent quality light tent set up in Canada.Shipping ect from the the states is killer,anybodys help is appreciated.
Karen
Volkano Exotik
|
Which set-up? The cube or the cloud dome? The $12 cube I have is only $3 shipping to Canada. It's just the cube with no lights, though. (I use $5 clamp lights with daylight bulbs.)
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-04-03, 10:39pm
|
Senior Member
|
|
Join Date: Aug 08, 2007
Location: coquitlam BC Canada
Posts: 1,501
|
|
Sorry..to clarify it's the table top studio mentioned near the beginning of the thread,It's pretty sweet .It is a gift for my B.Day[spoiled]...I'd really like to do the whole shebang at one time and like this set up but was wondering if there is one like it sold in Canada,other wise this looks like the one .
Karen
Volkano Exotik
|
2009-04-03, 11:21pm
|
|
Entropy increasing....
|
|
Join Date: Nov 12, 2005
Location: In a box of paints
Posts: 25,098
|
|
I use neither. I sold my cube. I don't find it necessary.
__________________
"I am an artist… I am here to live out loud." Emile Zola
|
2009-08-24, 7:06am
|
Mary Lockwood
|
|
Join Date: Jun 21, 2005
Location: Boonies
Posts: 5,831
|
|
LOL, I use a plastic grocery sack.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-08-25, 3:18pm
|
|
Senior Member
|
|
Join Date: Jun 03, 2006
Location: GA
Posts: 1,732
|
|
Mary I'd like to see how you use the grocery sack. Do you drape it over something?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
"People can be the wind beneath your wings or the anchor on your boat" John Maxwell
|
2009-08-25, 7:59pm
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
Do any of you actually use the nylon colored backgrounds the cubes come with? I find they have so many wrinkles they're not worth the bother. It's easier to just get some cardboard from the scrapbooking section of the craft store.
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-10-09, 12:28am
|
Junior Member
|
|
Join Date: Oct 01, 2009
Posts: 11
|
|
Well I do not know about the two and difference between the two, but I have voted in favor of Table Top Cube. Any one who knows about it please elaborate it.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-10-29, 4:31am
|
|
Senior Member
|
|
Join Date: Jul 16, 2005
Location: Gainesville, FL
Posts: 450
|
|
Cube lighting
Shawnette (or anyone),
what do you use for lighting? I have two ott lamps would that work?
|
2009-12-18, 6:52am
|
|
Linda Linda Honey, lookit
|
|
Join Date: Oct 31, 2008
Location: Almost paradise... ccept for the humidity.
Posts: 951
|
|
Quote:
Originally Posted by wnbresn
|
RIP OFF!!!!!
__________________
Christopher
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-01-05, 6:23pm
|
|
OBA-Official Bead Addict
|
|
Join Date: Jul 26, 2006
Location: Chilliwack BC Canada
Posts: 593
|
|
Quote:
Originally Posted by teachertracey
|
I was just going to order that until I found out the shipping to Canada is $68.00.....I had to email the company and tell them they made a big mistake on the shipping....it's more than the cost of the item! I'm not ordering a friggen refrigerator....LOL!
Janet
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2010-01-18, 7:02am
|
|
Member
|
|
Join Date: Aug 13, 2008
Posts: 75
|
|
Got here late, but here is my $.02 worth. The Cloud dome can produce very good pictures AFTER you master the learning curve. I was never able to master the learning curve.
With that in mind, if anyone would like a Cloud dome set up, I will be happy to send you mine for the cost of packing and shipping. I will take it to FedX and have them pack it and ship it. You would be responsible for what they charge me for this service.
If anyone wants it, it goes to the first person that pm's me...Smithy
__________________
Don't take life to seriously...you'll never live through it....
|
2010-01-18, 4:29pm
|
Senior Member
|
|
Join Date: Mar 18, 2008
Location: Hillsboro, OR
Posts: 674
|
|
Quote:
Originally Posted by menty666
Do any of you actually use the nylon colored backgrounds the cubes come with? I find they have so many wrinkles they're not worth the bother. It's easier to just get some cardboard from the scrapbooking section of the craft store.
|
I use them sometimes. I also buy a nylon that is closer to what comes on umbrellas, softboxes and light tents, Sport Nylon. It's a bit thicker than rip-stop nylon and doesn't have all those little zig-zag stiches that you can see in rip-stop. I buyit in different colors although white and black are what I use the most. It's also good for making light panels using PVC tubes.
To get the wrinkles and creases out, I get it wet (it doesn't really get wet since it doesn't absorb water) and throw it into the dryer for about 5 minutes or so. When I take it out I give it a good shake and as long as I don't wad or fold it up, there aren't any wrinkles. You can buy Sport Nylon at JoAnn's (it's by the rip-stop nylon) or buy it from a place like Seattle Frabric's. I made 2 6'x4' light panels out of it and PVC pipe and used that for a long time rather than a light tent. I paid $35 for all the materials I used, but I could have bought less and still had stuff left over like I did.
Mike
__________________
It's said that there is an artist inside each of us...unfortunately, mine left years ago and I've not seen him since.
|
2010-01-19, 9:17pm
|
|
Borovangelist
|
|
Join Date: Jan 26, 2007
Location: Auburn, MA
Posts: 3,002
|
|
oooh, I like the dryer idea, thanks! I was going to try ironing it in a wet towel, but your idea's less hassle
__________________
-Tom
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-05-01, 7:20pm
|
|
grama punky - class junky
|
|
Join Date: Aug 08, 2009
Location: Wisconsin
Posts: 1,034
|
|
I bought a white sheet ($3)... made panels and pinned (.59) them in place on one of my pantry closet shelves. I bought two $8 work light from menards. Had a piece of mirror (free) and it all works just fine for less than $20.
__________________
Donna
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-05-01, 9:45pm
|
|
Everybody Needs Beads!
|
|
Join Date: Nov 09, 2005
Location: Des Moines, Iowa
Posts: 1,524
|
|
We'd like to see a picture, Donna!
__________________
Tera Belinsky-Yoder
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Beadygirlt. on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2011-05-25, 11:54pm
|
|
Senior Member
|
|
Join Date: Mar 06, 2011
Location: SF bay area
Posts: 1,470
|
|
I use the cloud dome since nothing else was working when shooting my wife's cloisonne enamel work, the combination of glass and polished silver was to much glare, none of the tent things helped, it did take me a bit to learn how to best use it, we did find it needs a lot of light source and given my preferences I will just shoot outside when lighting permits.
I do also use a digital SLR that fits the holding bracket and a high quality macro lens.
__________________
Morgan
Bethlehem Champion To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. #C-151
|
2013-04-18, 9:16am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
I have one of the cheap photo cubes and it works great but recently I made a much bigger one with PVC and a white sheet. It's a ghetto rig, but it works great and everything fits inside!!
(and it cost less than $10!)
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-18, 9:30am
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-04-18, 1:13pm
|
|
Senior Member
|
|
Join Date: Mar 06, 2011
Location: SF bay area
Posts: 1,470
|
|
so I want to amend my original vote, they both suck lol
I have both and got ok results from them, but after taking Doug Baldwins class at the Gathering last year and picking up a pair of the lights he makes I no longer use either my cube or my cloud dome.
I highly recommended taking one of his classes if you can.
here are pics I took using what I learned and the lights, other than cropping and a quick white balance adjustment there is no Photoshop manipulation in the first two.
The last one one using Photoshop and what I learned in the class on how to make a reflection
__________________
Morgan
Bethlehem Champion To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. #C-151
|
2013-06-20, 5:44am
|
|
Senior Member
|
|
Join Date: Nov 22, 2012
Location: Eastern Shore Maryland
Posts: 958
|
|
Very pretty Morgan! (Wish I was going to the gathering to take his class!)
Quote:
Originally Posted by Baywinger
so I want to amend my original vote, they both suck lol
I have both and got ok results from them, but after taking Doug Baldwins class at the Gathering last year and picking up a pair of the lights he makes I no longer use either my cube or my cloud dome.
I highly recommended taking one of his classes if you can.
here are pics I took using what I learned and the lights, other than cropping and a quick white balance adjustment there is no Photoshop manipulation in the first two.
The last one one using Photoshop and what I learned in the class on how to make a reflection
|
__________________
Happy Torching! Julie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. ~ To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-06-21, 9:38pm
|
Pixel Dude
|
|
Join Date: Apr 26, 2013
Posts: 49
|
|
Hello Julieann1674,
I'd love to have you join my photo class at the Gathering on July 23 & 24 in Rochester. There are seats still available. Morgan was a student in my class at last year's Gathering. It's a 2-day class. The first day we go through the 10 parameters that make a good photo, adjusting the camera's settings and menus for the highest quality photos possible, how to light your art for professional results and then the students spend about 4-5 hours shooting their own jewelry, beads and glass art using lights I bring to class. The second day we spend on Photoshop. There is a description and photos about the upcoming class in the Classes section of this LE website. Hope you'll join us.
Doug
dougbaldwinphoto.com
|
2013-06-21, 10:25pm
|
Angie09
|
|
Join Date: Aug 06, 2009
Posts: 1,788
|
|
I just had a 4 hour private lesson with Doug in Prescott, AZ. Worth every penny!! He has the solutions to taking photos of beads and jewelry. I can't wait to get back home and try out what he taught me and play with my new lights. I HIGHLY recommend taking any class you can with Doug!!!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 11:36pm.
|