Lampwork Etc.
 
TrueDesign

LE Live Chat

Enter Live Chat

No users in chat


Jelveh Designs - Glass Beads Torched One-by-One

Caber Light


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2016-01-26, 10:54pm
RockinRobyn's Avatar
RockinRobyn RockinRobyn is offline
Junior Member
 
Join Date: Dec 03, 2014
Posts: 10
Unhappy Help! Anyone programmed their very own controller?

Hi Everyone,

I am currently building my own kiln. So far all is going well but now I am stumped with making my very own controller.

I purchased a Omega CN8200 engineering temperature controller as it fit into my college student budget... And so far I am having a lot of problems programming it. If anyone has any experience reprogramming these controllers, and could lend some advice would be so much appreciated

Thanks in advance
__________________
Sincerely Rockin Robyn
"Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep" - Scott Adams

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #2  
Old 2016-01-27, 11:05am
AmorphousDesigns's Avatar
AmorphousDesigns AmorphousDesigns is offline
Wonder-wench
 
Join Date: Aug 09, 2010
Location: land of milk & honey
Posts: 1,104
Default

do you have the manual? I found this, it might help.

https://www.omega.com/manuals/manualpdf/M2942.pdf
__________________
Elizabeth

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 2016-01-27, 4:13pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

Yes. Get the manual. In my experience the Omegas are not as intuitive as some of the others but still very manageable with the manual. Good solid controllers though.
Reply With Quote
  #4  
Old 2016-01-30, 11:39am
flowman flowman is offline
Member
 
Join Date: May 06, 2013
Location: Northeast Georgia, USA
Posts: 58
Default

Wow, I've been poking around, and I can't find anything on how to actually program the ramp and hold recipes on this controller. I've purchased two from Auber (http://www.auberins.com/index.php?ma...=index&cPath=1) and had fairly good luck with them, so I thought I might be able to give you some tips, but I can't find anything on how the Omega recipes are set up. Can you return it? The Auber units are only about $50.
__________________
Steve Hilliard, sghilliard glass studio

To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Reply With Quote
Reply

Tags
annealer, controller, kiln, making


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 8:04am.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 44.211.34.178