Why is my HH behaving like this? :poke:
Hello,
I have just installed my new tank with a HH. I am using a small tank like the ones used in a grill. I have a 30 feet hose attached to it. Tank is outside, fully open. Last time I used it, it would sputter every once in a while and kind of shoot sparks.
This time it's not doing that but it seems to increase and decrease the flame on its own. Like it were puffing.
Bet this has been addressed before but I can't find it and I'm afraid something will go wrong.
I just went back to try to make some more beads and now I can't control the flame at all! I light it and it lights this huge flame and I can't lower it because it turns off and then even while on off it keeps coming out for a second or two, kinda scary! Could it be my hose is too long? I can't think what can be wrong. New tank, not refilled.
UPDATE:
While waiting for an answer here, I decided to roll in the full length of the hose inside my studio while keeping my tank still outside but with a shorter end of the hose outside. This fixed it! Or did it? I wonder if this just happened while my tank settled again or if the hose had anything to do with it?
THANKS!!
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|