Yep just like bhhco said. It is just that easy with a pre-wired plug in controller.
Plug the kiln in to the controller, Plug the controller in ,insert your thermocouple,set the dial on the kiln to 10 or HI and your done.
Quote:
How did you know which controller to buy? I have an Arrow Springs AF99
|
Basicly wich ever kiln you have. You just need to know what voltage your kiln work on 110v-120v or if its a 220v-240v kiln. and how many amps or watts it draws.
then you need to decide if you need one that can do ramping and soak programs or if you just need one that holds a single setpoint.