|
Tips, Techniques, and Questions -- Technical questions or tips |
2021-10-21, 10:52am
|
Joyful Adornments
|
|
Join Date: Feb 05, 2008
Location: Salem, VA
Posts: 21
|
|
Hollow Beads
I'm familiar with making hollow beads on a puffy mandrel. I want to practice making consistent 'small' hollow beads for earrings. Looking for tutorials and/or help. Any guidance would be appreciated.
|
2021-10-21, 2:32pm
|
Senior Member
|
|
Join Date: Dec 31, 2009
Posts: 504
|
|
I've never tried making hollows with a puffy, but I habitually build them on solid mandrels. I can get them down to the size of peas, and here's how:
1. Use a stiffer grade of glass for making them. CoE 104 is too soft to make them easily unless you're really good at temperature control. For this sort of work, 96 or 90 would be better, and my personal favorite is recycled bottle glass. That's in the 80's somewhere, and makes beautiful hollows. I like to use stringers for this purpose--a 4-6mm rod is way too clunky.
2. Use a thin mandrel. For tiny hollows, I prefer Devardi's 1.2mm mandrels, which I also use for making bottle-glass spacer beads.
3. Having acquired the necessary materials and equipment, remember to keep the flame low. Work these very cool! Trying to rush them will end in disappointment.
4. For consistent pairs, I will build up a disc near the end of the mandrel, perhaps 3/8 " in diameter. Wind another disc maybe a quarter-inch down from the first, and then join them by carefully winding coils from the lower disc to the upper, being careful not to overheat them or leave any pinholes.
5. Heat the bead gently, just enough to fuse it into a cohesive whole. Then, while keeping the first hollow warm, build another one below it. Sometimes I can get 3 in a row on the same mandrel, if they're small enough.
6. Practice, practice, practice. You will screw up a bunch of times, hollows are tricky no matter what technique you use. For a more in-depth tutorial, check out the April 2012 issue of Soda Lime Times, which has pictures and everything.
Good luck!
|
2021-10-21, 5:54pm
|
Joyful Adornments
|
|
Join Date: Feb 05, 2008
Location: Salem, VA
Posts: 21
|
|
THANKS
AWESOME Info..... I "AM" using bottle glass, so I'm good there! I have made them on regular mandrels, but I guess I just need to pull stringers and work cooler. I'll check out the reference source too. You're Great! THANKS!!! ~B
|
2021-10-21, 7:23pm
|
Joyful Adornments
|
|
Join Date: Feb 05, 2008
Location: Salem, VA
Posts: 21
|
|
I had the SLT april 12 issue.....again, big thanks. Off to practice, practice, practice!!! B
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 12:44pm.
|