|
Tips, Techniques, and Questions -- Technical questions or tips |
2013-03-06, 12:47pm
|
Junior Member
|
|
Join Date: Aug 09, 2011
Location: Issaquah, WA, USA
Posts: 7
|
|
Looking for advise on Burning Man set up
Hi,
I am thinking to set up a working station on my camp during Burning Man festival ( http://www.burningman.com/). The idea is to show what is lampworking and how exciting this process is. I searched through this forum but it looks like nobody did it before.
Some challenges I see are
- altitude at 4,000 ft.
- wind and dust in air (I am not planning to work through very windy conditions but it always some quantity of dust anyway)
- dust has a slight alkaline reaction
I am planning to bring HH with regular BBQ propane gas, very basic tools and colors, and work mostly with simple shapes and techniques to get more beads quickly. No kiln, no cleaning, beads from vermiculite are ready to pick up as soon as temperature allows.
I will appreciate any tips on that approach.
Thanks,
Julia
PS: you are not allowed to sell your creations there but people always appreciate giving away
|
2013-03-06, 1:07pm
|
|
I like fire....
|
|
Join Date: Jul 24, 2012
Location: Everett Washington
Posts: 132
|
|
you dont post often do you
so i love your idea... i think its great.
I wish i had some advise for you - but I can only offer encouragement and beg you to take lots of pictures and share them.
above all else - have fun
__________________
Ritch
Mega Minor, on tanked oxy
Playing on both sides of the dark side - Boro and Not Boro To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-06, 5:07pm
|
Junior Member
|
|
Join Date: Aug 09, 2011
Location: Issaquah, WA, USA
Posts: 7
|
|
Yep, I am reader type not writer
Thanks for good wishes.
|
2013-03-07, 3:29am
|
|
Senior Member
|
|
Join Date: Mar 14, 2012
Location: Bennington, VT
Posts: 1,776
|
|
don't eat the brown acid.
oh wait, wrong era lol.
__________________
now i've got a Mirage To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-07, 8:42am
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
I'ts not much different the most outside shows,
The lighting can make working during the day difficult, a good lean to style setup can also help if you endup with a bit of a draft.
Visite your local welding shop for some kevlar sleaves, they are cheap and often a knit material.
These are handy to cover your torch head, connectors, and valve on the tank.
Just to cut down on the dust and grit.
Tube socks work just as well but if the metal is hot the elastic can melt on the hot torch.
For demos I like useing a new paint can from the hardware, it makes setup fairly quick.
Some wire or hemp to string the beads on can help ensure they don't get lost by the folks you give them to.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-07, 9:19am
|
Junior Member
|
|
Join Date: Aug 09, 2011
Location: Issaquah, WA, USA
Posts: 7
|
|
Quote:
Originally Posted by losthelm
I'ts not much different the most outside shows,
The lighting can make working during the day difficult, a good lean to style setup can also help if you endup with a bit of a draft.
Visite your local welding shop for some kevlar sleaves, they are cheap and often a knit material.
These are handy to cover your torch head, connectors, and valve on the tank.
Just to cut down on the dust and grit.
Tube socks work just as well but if the metal is hot the elastic can melt on the hot torch.
For demos I like useing a new paint can from the hardware, it makes setup fairly quick.
Some wire or hemp to string the beads on can help ensure they don't get lost by the folks you give them to.
|
That is a great idea about covering! I added it to my preparation plan. Thanks!
|
2013-03-07, 10:14am
|
|
Redheaded Thread Killer
|
|
Join Date: Sep 18, 2004
Location: Here and There
Posts: 1,922
|
|
Not sure if there are any safety regulations they have in place, but you may want to check. Would hate for you to get it all set up and a fire marshall come by and shut it down.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Currently... torch is cold. Not sure when I'll be making glass again. Hothead and Lynx user.
Nothing on To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-07, 10:43am
|
|
T.J. made me do it
|
|
Join Date: May 09, 2007
Location: Tahoe-Douglas, NV
Posts: 1,120
|
|
Definitely have something to cover your equipment. The dust is hideous. You'll spend years trying to clean everything even with the cover. You shouldn't have a problem with altitude. I torch at 5500 feet.
__________________
Julie
-Outwest Art Glass
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-07, 11:52am
|
|
Senior Member
|
|
Join Date: Jun 14, 2005
Location: The Rocky Coast State!
Posts: 6,620
|
|
My concern is giving away beads that have not been annealed so... my advice is to keep your beads small.
If it's a bright day outside, your flame is going to be hard to see. And if it's breezy, plan to swear INSIDE your head... again, keeping your beads small will help. They don't take that long to make so you won't fight with the wind for long on each one.
Be sure to block off the area your flames will be heading in. People are fascinated by what we do and are not smart enough to add 1 + 1 to make it = HOT! Ya don't want anyone strafing themselves with flames.
Just my thoughts and worth about what you paid for them.
Sue
__________________
Sue Walsh
The past is history,
The future is a mystery
and the present is a gift.
|
2013-03-07, 12:14pm
|
Senior Member
|
|
Join Date: May 27, 2008
Location: Albion NY
Posts: 517
|
|
As for keeping people back fondue forks and marhsmows or vienna sausages work well.
though I would not eat when doing glass.
Or you can often get a few feet or police or fire tape from the authoritys, a 1k" roll is usualy around $15 and a little overkill for one setup.
often the fiberglass driveway markers should do the trick to keep people back.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-07, 2:35pm
|
Alaska Boro
|
|
Join Date: Dec 10, 2009
Location: Anchorage, Alaska
Posts: 1,065
|
|
And if someone does get hurt will you have liability insurance?
|
2013-03-08, 9:29am
|
Junior Member
|
|
Join Date: Aug 09, 2011
Location: Issaquah, WA, USA
Posts: 7
|
|
As far as I know if you go there you automatically agree to take all risks . There are a lot of activities during that week and a lot of them involves fire.
But I will definitely check rules on that topic and will limit access to the zone one way or another.
|
2013-03-08, 10:46am
|
Senior Member
|
|
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
|
|
Quote:
Originally Posted by Sleepless2000
As far as I know if you go there you automatically agree to take all risks . There are a lot of activities during that week and a lot of them involves fire.
But I will definitely check rules on that topic and will limit access to the zone one way or another.
|
Hahaha....I dont think a hothead flame is even close to a liability compared to what else goes on unregulated there
|
2013-03-09, 6:14pm
|
|
Breaks Things
|
|
Join Date: Nov 19, 2011
Location: Tip o' Texas Lat 26°N Lon 98°W
Posts: 270
|
|
They do require a fire permit, there is an application process/
Good luck and let us see those pictures!
__________________
Can't Draw, Can't Paint, Can Break Things - Yeah GLASS!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * * * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-09, 9:12pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
I have only been once, but the year I went was a year of epic dust storms and wind all the time, so you will probably want an entirely enclosed space or be willing to give up on torching altogether if conditions are adverse.
No fire marshall, no real safety laws to speak of other than firearms and most explosives being banned.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-09, 9:12pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
I didn't know about the fire permit, is that new-ish?
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-10, 8:09am
|
|
T.J. made me do it
|
|
Join Date: May 09, 2007
Location: Tahoe-Douglas, NV
Posts: 1,120
|
|
Since the festival has increased in size there might be some new regulations that have gone into effect. I'd check with Pershing County, NV which has a county seat in Lovelock.
__________________
Julie
-Outwest Art Glass
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2013-03-21, 12:01am
|
Feuer,Flamme and Tattoo's
|
|
Join Date: Sep 11, 2005
Location: in the Liquid Sunshine State
Posts: 551
|
|
Seen a three sided high plexi glass shield taped down on the workstation before and if really windy put an extra one on top. You can all hold it together with clear packing tape. Yeah and you don't want some "acid" freak touching your flame either.
Katja
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 8:01pm.
|