|
Tips, Techniques, and Questions -- Technical questions or tips |
2009-11-20, 12:14pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
From the original auction:
Quote:
Devardi glass is a handmade, hand pulled glass that uses very ancient glass recipes. It is not like the stripped down comercial varieties that flood the market.
|
So I misremembered... you didn't say "cut corners", you said "stripped down". It's an inaccurate unfavorable comparison that infers that Devardi is superior. That is one of the things that led people to question you.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 12:17pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Is Firemagic one of the "Devardi people"?
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 12:25pm
|
|
Duchess of Dichro
|
|
Join Date: Jun 03, 2006
Location: Long Island New York
Posts: 2,399
|
|
Quote:
Originally Posted by andreajane
But why would one glassmaker make negative remarks about another glassmaker? If the glass is good AND cheap, trust me when I say this community will find it and use it without the makers needing to say anything else about what anyone else is doing.
Andrea
|
I agree !
__________________
Leslie
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 12:26pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
Quote:
Originally Posted by andreajane
Is Firemagic one of the "Devardi people"?
Andrea
|
Yep, it's Dan. Up to his old tricks.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 12:32pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by Kalera
Yep, it's Dan. Up to his old tricks.
|
OK...then him talking about himself in the third person while discussing problems with his product has helped me make up my mind.
Thanks.
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 12:38pm
|
|
Rose colored glasses…√
|
|
Join Date: Jul 22, 2005
Location: Monticello, FL
Posts: 8,259
|
|
Quote:
Originally Posted by Hayley
Kalera and Chris - one of our cars is a Volvo 950!
|
940? or 850?
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. OMG I listed some stuff!!! Little devils ARE ice skating!!! To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
RIP Sunday; You can donate for Izzy's Future Trust @:
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Live kindly...'cause karma will bite you in the ass harder than you ever thought about nibblin'...
|
2009-11-20, 12:48pm
|
|
Senior Member
|
|
Join Date: Jun 27, 2005
Location: Yarmouth, Maine...home of the Clamfest
Posts: 7,693
|
|
Hey, I got "graded" on my "test" answers
(and I got them "half right" )
All *I* know is, I bought some glass (a long time ago), the rods they *said* would be bubble-glass *were* bubble-glass & DIDN'T cost $40+ a pound & *weren't* hollow rods (so they didn't need to be kept in a special place 'cause they weren't all fragile & breakable & terrifying to use), & the "bubble-glass" had loads of bubbles & was gorgeous colors (so, no "use bubble glass with a transparent to get a color" routine)
The other stuff *seems* to be compatable with 104--the beads I made, stuffed into a crockpot & had batch annealled later all have *not* broken. I made them the same way I make my beads using Lauscha (another glass that *supposedly* you "can't batch anneal" ) & two of them have some of Brad's Striking Glass Color on Devardi Metallic Black & multiple months later, they're still intact. I didn't swirl it in, so that *could* be why. I don't know. All I know is one of them has been banging around my purse for months (not great treatment for a bead ) & it's fine.
I like the metallic black a LOT & for $6 a pound, it's shiny, easy to use, and a heck of a lot closer to my budget than any *other* brand of "shiny"--and when I'm selling beads for uber-cheap to people who are looking for bargains, not "name-brands", I'm fine with that! (particularly when it's passed being tested in my purse for nearly a year )
And seriously, PINK for $6 a pound? Yeah, I'm buying it. And testing it *exactly* the same way. Valentines day is coming in a few months--I can't *get* $40 a bead--I'm lucky if I can get $10-$12 for a bead *on a chain*!--and if this glass is stable enough to use even as a "single color" glass for basic production of simple shapes--I'm good with it!
__________________
And if I laugh at any mortal thing, ‘Tis that I may not weep...” ~Lord Byron
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
new purple cricket @ home! minicc @ playing with fire in rockland! Sue & Nikki fighting over who gets to anneal the wonkies To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:01pm
|
|
da General
|
|
Join Date: Oct 05, 2006
Location: San Francisco
Posts: 13,002
|
|
Quote:
Originally Posted by chrissij
940? or 850?
|
Fingers had a mind of their own and mistyped! 850 Turbo . . . it's a work horse!
__________________
Hayley
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:04pm
|
|
da General
|
|
Join Date: Oct 05, 2006
Location: San Francisco
Posts: 13,002
|
|
Quote:
Originally Posted by andreajane
OK...then him talking about himself in the third person while discussing problems with his product has helped me make up my mind.
Thanks.
Andrea
|
Andrea - that's one of the reasons why I have made it a personal practice to not reply to posts from those who refuse to disclose his/her identity . . .
__________________
Hayley
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. | To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:07pm
|
Senior Member
|
|
Join Date: Feb 06, 2009
Posts: 501
|
|
Quote:
Originally Posted by Kalera
Yep, it's Dan. Up to his old tricks.
|
It is?
|
2009-11-20, 1:07pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
Quote:
Originally Posted by Hayley
Andrea - that's one of the reasons why I have made it a personal practice to not reply to posts from those who refuse to disclose his/her identity . . .
|
That's making more and more sense. No avatar, no signature, no location, and not so much as a first name = probably a dupe account.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:12pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by lunamoonshadow
Hey, I got "graded" on my "test" answers
(and I got them "half right" )
All *I* know is, I bought some glass (a long time ago), the rods they *said* would be bubble-glass *were* bubble-glass & DIDN'T cost $40+ a pound & *weren't* hollow rods (so they didn't need to be kept in a special place 'cause they weren't all fragile & breakable & terrifying to use), & the "bubble-glass" had loads of bubbles & was gorgeous colors (so, no "use bubble glass with a transparent to get a color" routine)
The other stuff *seems* to be compatable with 104--the beads I made, stuffed into a crockpot & had batch annealled later all have *not* broken. I made them the same way I make my beads using Lauscha (another glass that *supposedly* you "can't batch anneal" ) & two of them have some of Brad's Striking Glass Color on Devardi Metallic Black & multiple months later, they're still intact. I didn't swirl it in, so that *could* be why. I don't know. All I know is one of them has been banging around my purse for months (not great treatment for a bead ) & it's fine.
I like the metallic black a LOT & for $6 a pound, it's shiny, easy to use, and a heck of a lot closer to my budget than any *other* brand of "shiny"--and when I'm selling beads for uber-cheap to people who are looking for bargains, not "name-brands", I'm fine with that! (particularly when it's passed being tested in my purse for nearly a year )
And seriously, PINK for $6 a pound? Yeah, I'm buying it. And testing it *exactly* the same way. Valentines day is coming in a few months--I can't *get* $40 a bead--I'm lucky if I can get $10-$12 for a bead *on a chain*!--and if this glass is stable enough to use even as a "single color" glass for basic production of simple shapes--I'm good with it!
|
If I pay less than $25/lb for the glass I use, I don't even take it into consideration when pricing my beads. I am learning a lot from this thread!
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:18pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Say I pay $40/lb including shipping, and just to make the math easy, I get 40 focal beads out of that pound. That's a dollar a bead.
If I pay $10/lb for glass and get 40 focal beads out of it, that's 25 cents a bead. That's only a 75 cent different per bead.
Just thinking out loud.
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:30pm
|
|
Silver Hogs/Tool Junkies
|
|
Join Date: Jun 09, 2006
Location: Lake Mary, Florida
Posts: 1,028
|
|
ahh... that adds up to a $30.00 savings.
Jack
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:32pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by J&M
ahh... that adds up to a $30.00 savings.
Jack
|
Well, that's true before you even make the first bead.
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:33pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by andreajane
Say I pay $40/lb including shipping, and just to make the math easy, I get 40 focal beads out of that pound. That's a dollar a bead.
If I pay $10/lb for glass and get 40 focal beads out of it, that's 25 cents a bead. That's only a 75 cent different per bead.
Just thinking out loud.
Andrea
|
Yes, BUT you can get 4lbs instead of 1lb, so that 160 focals for the same $$.
But I don't sell... I bought the glass because some of the colors are TDF and not difficult to work with at all. Some are (in my opinion) a PITA that I won't buy again, but I was forewarned and I only bought .25lb anyway. ($2).
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:36pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by shawnette
Yes, BUT you can get 4lbs instead of 1lb, so that 160 focals for the same $$.
|
There are lots of ways to look at it.
eta: That's a good way if you make 160 focals out of the same glass
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:36pm
|
|
Silver Hogs/Tool Junkies
|
|
Join Date: Jun 09, 2006
Location: Lake Mary, Florida
Posts: 1,028
|
|
Quote:
Originally Posted by andreajane
Well, that's true before you even make the first bead.
Andrea
|
Exactly my point. Thank you.
Jack
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:36pm
|
|
Silver Hogs/Tool Junkies
|
|
Join Date: Jun 09, 2006
Location: Lake Mary, Florida
Posts: 1,028
|
|
wow.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:38pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by J&M
Exactly my point. Thank you.
Jack
|
You're welcome!
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:39pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by J&M
wow.
|
What does this mean?
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 1:42pm
|
|
I fart diamonds
|
|
Join Date: Jun 14, 2005
Location: Altamonte Springs, FL
Posts: 3,893
|
|
Quote:
Originally Posted by andreajane
There are lots of ways to look at it.
eta: That's a good way if you make 160 focals out of the same glass
Andrea
|
Production workers and people on the show circuit often do. When I was using Effetre, it wasn't uncommon for me to buy 5lbs of a particular color, if I liked it. I bought 8lbs of BG Pink & 10lbs of Slate.
(Or you could by 1lb each of 4 colors...)
__________________
-Shawnette the original "everybody get a grip" girl
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 1:43pm
|
Senior Member
|
|
Join Date: Feb 06, 2009
Posts: 501
|
|
I usually buy my clear in 5 lb lots.
|
2009-11-20, 2:07pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
My torch cost $700. My kiln cost $1200. Then there are the oxygen concentrators and the cost of fuel and electricity to keep these things operating.
Honestly, when I do my taxes at the end of the year, glass is one of my smallest expenses, and that's despite buying silver glass, boro, and Bullseye, among other things. I think I spent $600 on glass last year... that would be a lot if I wasn't selling, but I support my family on proceeds from my beads. If I wasn't selling, I wouldn't have needed so much glass. I buy the glass I need; sometimes I make a lot of boro beads, so I buy more boro. Sometimes I make a lot of Effetre and Vetrofond beads and Mike Frantz gets my business. I don't think, "Oh, Effetre is cheaper than BE so I'll buy more Effetre and just make Effetre beads for a while". It just doesn't factor in.
My main concern is whether the glass is good quality. I also take other factors into consideration, but that's at the top of my list. Like I said before, if it's lower-quality it's perfectly fine for practice, but in terms of overhead, if you're breaking it down financially for business purposes, the glass is such a tiny percentage of your costs that whether you pay $5/lb or $40, it's barely worth taking into consideration for pricing purposes, IMO.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 2:27pm
|
|
Life is change. Love it
|
|
Join Date: Oct 10, 2005
Location: Ontario Canada
Posts: 5,566
|
|
I haven't used this glass, so I have no opinions on it.
I would like to relate my experiences with other 'problem' glass though. I had a batch of Diamond Clear that cracked. Abe offered to replace it, but I declined as I had only bought 1/2 lb. I also bought some TAG clear that looked liked seeded glass when worked on my Cricket. Fine on a Minor though??? Anyway, Jenny offered to replace it or give me glass in exchange. My point is that both manufacturers were extremely ready to admit there may have been problems with the glass, and offered to make it good. Devardi responds to criticism by insulting and undermining the skills of the beadmaker posting the problem.
For that reason I will probably not buy any Devardi, even though I would love to try some of their colours. I only like to do business with respectful vendors who's attitude (in public) is one of 'the customer is always right'
__________________
cRlyn, cause Traci says so
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 2:55pm
|
|
doyenne of the homebodies
|
|
Join Date: Jun 06, 2005
Location: suburban Chicago
Posts: 5,564
|
|
Quote:
Originally Posted by shawnette
Production workers and people on the show circuit often do. When I was using Effetre, it wasn't uncommon for me to buy 5lbs of a particular color, if I liked it. I bought 8lbs of BG Pink & 10lbs of Slate.
(Or you could by 1lb each of 4 colors...)
|
That makes sense. Luna's post just started me on a train of thought, but everyone has to price things the way that works for them.
Andrea
__________________
"I never watch the stars, there's so much down here" - Lorde
|
2009-11-20, 3:24pm
|
|
Meow.
|
|
Join Date: Jun 10, 2005
Location: Physically? Or mentally?
Posts: 5,035
|
|
I haven't said a thing (that I remember) regarding Devardi up until now -- and I've lurked on the threads, starting with the one months ago when the glass was first talked about here. I saw the nastiness from the (only) vendors of this glass first hand, before the posts were deleted. For that reason I'm not likely to ever purchase this glass either.
I speak with my wallet whenever I can - and as long as there is other glass with other vendors to choose from I'll go that route. The only time I deal with vendors/companies I *dislike* is when there's a NEED and no other place for me to get that need filled. Example - my local gas and cable companies. Otherwise, on principle, I'll hapilly spend more to support those who deserve it AND have what I need.
__________________
Kim
Go on. Click it!
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Yes. We. Did!
|
2009-11-20, 3:27pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
When I was figuring out how to price my boro beads, I did some calculating, breaking down the cost of glass in each bead. I was starting with the assumption that I would need to charge more for boro beads because boro color is about $40-50/lb. Clear is cheap, of course.
With my bracelet-sized beads, I get about 96 beads from each pound. Even if I make a set that's solid color, which I rarely do, that makes my materials cost just under .47 per bead assuming a cost of $45/lb. If I'm using Vetrofond, it would be 12.5 cents per bead. I could charge .34 cents more per bead for the boro, but really, whether a customer will pay that depends on how pretty the bead is, which depends pretty much entirely on how pretty the glass is, how well I work it, and how much effort (time) I put into the bead. So instead of basing my pricing on the cost of the glass, I focus on how long it takes me to make each bead... since my labor is the most expensive thing I'm putting into it. I've priced less-attractive beads made out of very expensive glass much lower than beautiful beads made out of cheaper glass.
The beauty and time factors are why a quality glass that's easy to work with are important to me. They're not necessarily important to everyone, but for me it's a prime consideration. Glass that's easy to work reduces the time I spend making each bead, which means that in a day I can be more productive and make more pretty beads, which in turn means I can price them more reasonably, sell more, and put more (figurative) food on the table at the end of the month.
That is my reasoning for spending more on better glass. It's not applicable to everyone's situation, it's just my personal answer to the "it's so inexpensive it will save you money, so why not?" question. In my specific situation, the way I use glass, it actually wouldn't save me money... same reason why expensive silver glasses, with their high beauty-for-the-dollar payoff, are worth it for me.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
2009-11-20, 3:39pm
|
Senior Member
|
|
Join Date: Feb 06, 2009
Posts: 501
|
|
Quote:
Originally Posted by Carolyn M
I haven't used this glass, so I have no opinions on it.
I would like to relate my experiences with other 'problem' glass though. I had a batch of Diamond Clear that cracked. Abe offered to replace it, but I declined as I had only bought 1/2 lb. I also bought some TAG clear that looked liked seeded glass when worked on my Cricket. Fine on a Minor though??? Anyway, Jenny offered to replace it or give me glass in exchange. My point is that both manufacturers were extremely ready to admit there may have been problems with the glass, and offered to make it good. Devardi responds to criticism by insulting and undermining the skills of the beadmaker posting the problem.
For that reason I will probably not buy any Devardi, even though I would love to try some of their colours. I only like to do business with respectful vendors who's attitude (in public) is one of 'the customer is always right'
|
Personally, I tend to allow vendors a mistake or two in their public dealings. Shortly after TAM came about, even Mike Frantz showed his hind end in public on there, about dealings with a customer. Quite a few people have shown a not so pretty side of themselves in one way or another. I like to see if it's a continuing manner of behavior or a short term action. If it doesn't happen again, I consider it being human and move on unless it really offended me personally.
I read the original threads. It wouldn't matter if Natasha and Daniel had pulled their posts or not, they would have been deleted when all the threads merged and came into the Tips and techniques thread below. There was a lot of nastiness going around in those posts-not just from Natasha and Daniel. They didn't handle it well. Personally, I could see responding the way they did. They did remove themselves from acting that way again, and I haven't seen them post in such a way again.
When I've emailed with them, they respond promptly and answer every question nicely. They haven't behaved poorly in public again. I like their glass. I think the colors are unlike what I see in some of the COE 104 lines available, and at the price, I think they are a good deal. I don't think they are any harder to work with than some of the more temperamental 104 glass already out there.
|
2009-11-20, 3:44pm
|
|
I'm a lilac!
|
|
Join Date: Jun 09, 2005
Location: Portland, Oregon
Posts: 8,793
|
|
I don't recall Mike Frantz being on TAM... do you mean Mike Aurelius? He's not exactly a good example for the point you're trying to make... what with the multiple accounts, sock-puppetry, and belittling customers with problems.
I'm glad you've had good experiences with Daniel and Natasha. I went into that thread thinking I'd be interested in trying Devardi, and came out of it wanting nothing to do with it, largely based on their behavior. The reports of low quality cinched it for me. Your decision is fine, and so is mine.
__________________
-Kalera
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts. * To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -7. The time now is 10:40am.
|