Lampwork Etc.
 
Send a PM to CorriDawn!

LE Live Chat

Enter Live Chat

No users in chat


Frantz Art Glass & Supply

Beads of Courage


 

Go Back   Lampwork Etc. > Library > Tips, Techniques, and Questions

Tips, Techniques, and Questions -- Technical questions or tips

Reply
 
Thread Tools
  #1  
Old 2018-07-26, 5:18pm
N&N Glass N&N Glass is offline
Junior Member
 
Join Date: Jul 26, 2018
Location: Warren, Ohio
Posts: 2
Default Oxycon system for running large torches

Hello everyone, name is Jon and this is my first thread- I hope I am posting in the right section!
I have been looking for days to find a fool proof oxygen concentrator system with compressor and tank to run a large torch- mine specifically being a GTT Phantom. I don’t want tanked oxy and have the means to get a system with generators, but even after days of searching I cannot find much. One website has a full plug and go system- consisting of a compressor with 60 gallon tank and three m10 oxycons for $8900. This seems a little steep after seeing other people building it themselves for considerably less.
I’ve read whatever posts in here I could find- one mentioning the hurricanes not being too efficient and a poor choice. Also read all the warnings about building a system and how having oil in the system can cause the tank to explode when compressed and such. And this is why I am asking for a little help- if anybody could point me where I could find step by step instructions on how to build one of these systems safely, OR if they know about a stand-alone generator I may not have heard about? If anyone is running their GTT Phantom or like-powered torch on generated oxygen I would like to know what you’re using! Thank you so much in advance!
Reply With Quote
  #2  
Old 2018-07-26, 5:35pm
Eileen's Avatar
Eileen Eileen is offline
Loving learning
 
Join Date: Oct 11, 2010
Location: Florida
Posts: 11,700
Default

I hope someone who knows will chime in, but I have heard there is another forum called, I think, Torch Talk that might be helpful too.
__________________
My current "hot" fantasy involves a senior discount on glass & tools!
Reply With Quote
  #3  
Old 2018-07-27, 6:58pm
Shaper Shaper is offline
Member
 
Join Date: Oct 24, 2013
Posts: 80
Default

This is a link that takes you to the "TMP" site. Lots of info there. Personally I think the "Oxygen Frog" setups are nice, expensive, but nice.

http://www.talkglass.com/forum/forum...ases-and-Fuels
Reply With Quote
  #4  
Old 2018-07-27, 9:49pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

I have to second the Talk glass forum too.

Lots of good information there.

Do remember that you will need to find oxygen safe high pressure hoses rated for 3000 psi.
Most regular hoses can react to pure oxygen and degrade from the inside and at these high pressures you will want braided wire reinforced hoses.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote
  #5  
Old 2018-07-28, 12:25pm
N&N Glass N&N Glass is offline
Junior Member
 
Join Date: Jul 26, 2018
Location: Warren, Ohio
Posts: 2
Default

Thanks guys I will check out the other forum too! If anyone happens to see this and has the answer don’t be shy
Reply With Quote
  #6  
Old 2018-07-29, 11:01am
Subduction's Avatar
Subduction Subduction is offline
Member
 
Join Date: Jun 22, 2018
Location: WA
Posts: 45
Default

I haven't built my HVLP system yet but I've collected all the parts. My timer relay is a Macromatic THR-3816U (but the simplified plan would probably work fine). I'm Subduction: http://www.talkglass.com/forum/showt...l-or-HVO/page2

I have a Mirage that will be using the HVLP for the outer ring; the center will be on one or two 20 psi, 10 lmp concentrators. Salt City Glass discounts concentrators during the winter.

Last edited by Subduction; 2018-07-29 at 11:05am.
Reply With Quote
  #7  
Old 2018-08-03, 1:56am
Oanivin's Avatar
Oanivin Oanivin is offline
Junior Member
 
Join Date: Aug 03, 2018
Location: Canada,Ontario
Posts: 3
Default

Do not forget to also include the cost to take time and swap K tanks out. I usually do mine on a Monday and it usually just kills my day as far as production. And last but not least, how much grief will it save you, every time I walk in and the oxy pirates tell me my fill cost has gone up another 10% I go ballistic. I can do without all the BS and corporate greed.

If you want to go the compressed oxy con route take a look at Metalbone's thread about using a Homefill II compressor and oxy cons. Initial cost is significantly lower. Stay tuned to this forum as I have a feeling you will see another tutorial using that system in the near future.

One thing to remember is none of these systems are designed to run continuous. A bottle or two a week is about all you will be able to compress and get any longevity out of your equipment.

How many bottles do you have? These micro compressors work best with lower pressures. Best case scenario would be to have a bank of 4 or more cylinders and only fill the entire bank to say 1000 psi. The volume will make up for the pressure but at a better fill rate and with less wear and tear on the compressor.




__________________________________________________ ________
Never take investment advice from someone who has to work for a living
All the best,Oanivin
Diceus

Last edited by Oanivin; 2018-08-03 at 2:01am.
Reply With Quote
  #8  
Old 2018-08-06, 4:20pm
Alan Alan is offline
Junior Member
 
Join Date: Jun 17, 2017
Posts: 10
Default

I am about to build a system my self to run a Bethlehem champ, have a look at or join this facebook site Concentrated Lampworkers they have lots of info and knowledge.
Reply With Quote
  #9  
Old 2018-08-19, 6:34am
glass addict glass addict is offline
Senior Member
 
Join Date: Jul 25, 2006
Location: ohio
Posts: 657
Default

I've also heard that folks move to a liquid oxy setup. I've thought about a homefill system as well. My big torch is a delta elite, but i seldomly use the outer fire due to O2 consumption. I'm in Akron, Ohio, so we are neighbors!
Reply With Quote
  #10  
Old 2018-08-30, 4:07pm
LarryC LarryC is offline
Senior Member
 
Join Date: Mar 07, 2011
Location: Northern California
Posts: 2,023
Default

A liquid dewer is the clear choice for cost, efficiency, purity, etc. A high volume and purity oxygen generator system is just not a cheap endeavor. Additionally you will most likely still be dependent on medical concentrators which are just NOT designed for this application.
Reply With Quote
  #11  
Old 2020-09-05, 10:47am
RadarRidher RadarRidher is offline
'Plays with Fire'
 
Join Date: Jul 29, 2020
Location: Tennessee
Posts: 5
Exclamation Can't request or Register TalkGlass forum...Plz Help

Quote:
Originally Posted by Speedslug View Post
I have to second the Talk glass forum too.

Lots of good information there.

Do remember that you will need to find oxygen safe high pressure hoses rated for 3000 psi.
Most regular hoses can react to pure oxygen and degrade from the inside and at these high pressures you will want braided wire reinforced hoses.
Hi all-I've been trying to get a homefill setup modified as my quick connect pulls apart with the pressure and essentially backs out just enough to close off the check valves. It essentially disconnects the compressor from the whip/tank anywhere from 150-300 psi... I found several links like this post from SpeedSlug to check out the talkglass forum but can't register. They seem to have gone to posting in a "Request Box" forum but I can't post into that one either. Would someone who lives there and here please ask them contact me/setup a user ID GMCDave email ddrake.co@ G mail . com

Thanks--RR/Dave

Last edited by RadarRidher; 2020-09-05 at 10:54am. Reason: correct the ID
Reply With Quote
  #12  
Old 2020-09-05, 6:37pm
Speedslug's Avatar
Speedslug Speedslug is offline
Phill
 
Join Date: Mar 21, 2009
Location: Winnebago, MN
Posts: 2,489
Default

If I remember correctly Talk Glass sometimes takes a few weeks to get a request to join responded to.

Because the moderators also have lives and work and what not it can even be longer.
And this bug isn't making living any easier.
__________________
The Zombie Apocalypse is Upon Us.
Reply With Quote
Reply

Tags
air compressor, compressor, gtt phantom, oxycon, oxygen, oxygen concentrator, oxygen generator


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump




All times are GMT -7. The time now is 12:31pm.


Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Your IP: 3.231.219.178