Honestly, I'd much rather see the inside lined with galvanized metal than sheet rock. There is still paper on the sheet rock, which will burn and stink -- then it peels away, leaving the gypsum material open to fresh air, which dries it out and turns it into messy powder.
Use at least 1/4" spacers between the sheet metal and the wood framing to keep the wood from igniting, just in case.
__________________
To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
Chaotic Glass: Safety for the glassworker, and random thoughts and opinions on the state of the glassworking world To view links or images in signatures your post count must be 5 or greater. You currently have 0 posts.
|