If you connect your green oxygen hose directly to the T or Y, you will have to cut off the brass B-fitting (if it is still there). If you do not want to do this, you can make an adaptor with a short length of tubing attached to the T/Y, a Christmas tree adaptor plugged into the end of that, and a B to B fitting to screw into the Christmas tree adaptor to fit into the brass B fitting of the green oxygen hose.
Alternatively, you could do away with the green oxygen hose and just use a long length of 1/4" ID airline tubing to go from the connection T/Y straight to the torch. The 1/4" ID tubing will fit onto the inlet barbs of the torch
__________________
Kimberly
working glass since 1990 - melting it on a torch since 2002
|