K, I need some help! My kiln needs rewired AGAIN. This is like the 6th time I've had to rewire my kiln in the last 4 months. I'm pretty sure I know what the problem is. My ring terminals are too big! The wires are fanning out too much and are quickly fried.
The terminals I'm using are #10:
The electrical cord I'm using is a standard 14/13 tri type. I need to crimp each of the 3 wires within this cord. (I have no idea what size wires these little buggers are!):
I found some high temperature ring terminals at wiringproducts.com, but I don't know what size to buy!
PLEASE help! Any advice appreciated.
Candy